Table of Contents
Advertisement
Operation
4.2.4
Control displays / Function checks
display control
Horn/reset driving (seat
switch)
Signal lamp handbrake
battery capacity
horn
emergency stop
51500024
The display must switch on when the key position is
set to position I and the start button has been
pressed
.
Horn button / Reset button:
the driving reset button must be pressed every time
the machine is started or the driving is stopped due
to the driver getting up from the driver's seat
(triggered by the seat switch).
The reset button (and driving the machine) only
works when the driver is seated in the driver's seat.
When the handbrake is applied, the red LED on the
upper left of the valve lights up as soon as the start
system is switched on.
Indication (in the display) of the current battery
capacity in %.
Function test of the horn by pressing the black
button on the joystick.
Check emergency stop switch once a day. To do this,
activate the system start with the start key, then
actuate the emergency stop switch. The drive and all
functions of the machine must then be deactivated.
V2
21 / 43
GB
Advertisement
Chapters
Table of Contents
