Storage - probst VM-301-KJ-GREENLINE Operating Instructions Manual

Installation machine
Table of Contents

Advertisement

Storage

6
Storage
When the laying machine is stored for a longer time:
Store the machine in a level and dry place in a hall.
In order not to damage the lithium-ion batteries at cold outside temperatures (below 3° C), it is not
advisable to store the laying machine outdoors.
Pull the handbrake!
Use wheel chocks or similar which prevent the laying machine from rolling away unintentionally.
Protect machine from direct sea air (danger of corrosion!)
Retract the lifting cylinder.
Completely clean and lubricate all components (joints) according to the lubrication plan.
Completely clean and lubricate all components (joints) according to the lubrication plan.
Cleaning with a high pressure cleaner or water in the area of the cover is prohibited. Danger of short-
circuit/electric shock to the electronic components in the switch box and lithium-ion batteries.
Further details regarding storage can be found in the enclosed product data sheet for lithium-ion
batteries.
In the winter months, pour sufficient antifreeze into the windscreen wiper water.
Place the attached laying clamp (HVZ) on the floor, place the wooden beam under the grab cheeks.
Close main voltage to laying clamp (HVZ).
Open the secondary tension on the installation clamp (HVZ).
The 12 V battery ① for operating voltage (radio, lighting etc.) must be completely charged with a suitable
12 V charger via the 12 V socket ② under the cover after approx. 40-50 days at the latest.
Since otherwise NO system start is possible (even if all available lithium ion batteries are fully charged).
51500024
V2
34 / 43
GB

Advertisement

Table of Contents
loading

Table of Contents