Lifting The Machine With A Crane; Towing The Installation Machine - probst VM-301-KJ-GREENLINE Operating Instructions Manual

Transport
5.2

Lifting the machine with a crane

The lashing rings must never be used as attachment points when lifting the machine!
Only the suspension eye may be used to lift the machine with a crane.
When the machine is suspended from the crane, all movements on the crane must be done with the
utmost care!
•
There must be no persons in the danger area!
•
Let the machine swing as little as possible!
•
Do not allow the machine or parts of the suspension system to collide with other objects!
•
All safety regulations for working with lifting equipment must be strictly observed.
5.3

Towing the installation machine

Do not tow or wheel the installation machine without traction drive!
As this will cause damage to the drive.
•
For towing the installation machine (e.g. with empty batteries or a gearbox damage or similar) the front axle must be
raised accordingly (so that the front wheels do not touch the ground anymore).
•
As soon as the parking brake has been released, the installation machine can be towed away on the rear wheels.
51500024 V2
33 / 43
GB