After A Folder In The External Storage Is Mounted; During Front Panel Operations - Sony PMW-1000 Service Manual

LOG Alarm message in
status display area
W60-039 R/W Limit(B)
2-3-3.

After a Folder in the External Storage is Mounted

LOG Alarm message in
status display area
W40-025 Over DUR!(USB
DRV)
W40-06A USB DRV needs Re-
storing.
W40-06B USB DRV Error!
2-3-4.

During Front Panel Operations

LOG Alarm message in
status display area
— KEY INHI.!
— Not Open Clip!
— Clip End!
— Clip Top!
— EDL Top!
— EDL End!
PMW-1000
Alarm message in video
monitor screen
MEDIA REACHED REWRITE
LIMIT.
CHANGE MEDIA (B).
Alarm message in video
monitor screen
EXCESSIVE DURATION IS
IN USB DRIVE.
MEDIA ERROR.
USB DRIVE NEEDS TO BE
RESTORED.
USB DRIVE CANNOT BE RE-
STORED.
PLEASE RESTORE IT USING
THE RECORDED EQUIP-
MENT.
Alarm message in video
monitor screen
—
—
—
—
—
—
Description/action
The program-erase cycles of the memory card
reached the limit.
Replace the memory card.
Note
If you continue to use the memory card, normal
recording and playback may become impossible
Description/action
The total duration of the clips stored in the speci-
fied folder in the external storage exceeds 24 hours.
The specified folder cannot be used.
An abnormality has occurred on the specified fold-
er in the external storage, and data restoration is
needed. Perform data restoration on the external
storage in question or format it.
The specified folder in the external storage needs
data restoration. Perform data restoration on the
device that was used to record to the external stor-
age in question.
Description/action
This appears when the KEY INHI switch is "ON".
Set the KEY INHI switch to "OFF".
This appears when a clip operation is attempted
with no clip selected.
Select a clip in the clip list screen and try the op-
eration again.
During playback, this appears if you execute a for-
ward search when the unit is stopped at the last
frame of a clip.
To move to another clip, press the PREV, NEXT,
SHIFT + PREV, or SHIFT + NEXT button, or per-
form a thumbnail search.
During playback, this appears if you execute a re-
verse search when the unit is stopped at the first
frame of a clip.
To move to another clip, press the PREV, NEXT,
SHIFT + PREV, or SHIFT + NEXT button, or per-
form a thumbnail search.
During EDL playback, this appears if you press the
PREV button at the first frame of the first sub clip
of an EDL.
During EDL playback, this appears if you press the
NEXT button at the last frame of the last sub clip
of an EDL.
Continued
2-6