Control Panel (Lcd/Sw/Jog/Shuttle) - Sony PMW-1000 Service Manual

USB
Rear panel side
USB data is connected from the USB connector CN601 on the SY-425 board to the USB HUB controller (IC606). Then
the USB data is connected through the CN-3594 board to the CPU board (IT CPU) on the HPR-46 board to be controlled.
Front panel side
USB data, which is connected from the USB3.0 connector CN201 on the DIO-97 board to the USB3.0 HOST controller
(IC201), is converted to the PCI-Express (PCIe) signal.
Then the PCIe signal is connected to the CPU board (IT CPU) on the HPR-46 board to be controlled.
1-13-7.

Control Panel (LCD/SW/JOG/SHUTTLE)

• A 4.3-inch color LCD is mounted on the front panel to display settings, menus, and playback pictures.
• Through communication with the CPU board, the FP CPU (IC1700) on the HPR-46 board generates screens to be
displayed on the LCD, reads button and switch data, and controls LEDs on the front panel through the FPAC
(IC401) on the FP-182 board.
• Lighting the LEDs is controlled by the PWM system to reduce power consumption.
PMW-1000
1-36