Board - Sony PMW-1000 Service Manual

6-19. DIO-97 Board
Preparation
1. Remove the top panel assembly. (Refer to
2. Remove the bottom plate assembly. (Refer to
3. Remove the front assembly. (Refer to
4. Remove the DIO board assembly. (Refer to
Procedure
1. Remove the two screws.
2. Release the DIO board from the two hooks.
PSW2.6 x 6
DIO board
Notches
Boss
Hooks
Note
When installing the DIO board, insert the hooks into the notches and match the two bosses with the two holes as
shown above.
3. Install the removed parts by reversing the steps of removal.
PMW-1000
"6-3. Top Panel Assembly")
"6-4. Bottom Plate
"6-11. Front Assembly")
"6-17. HPR-46 Board/CPU
Hole
PSW2.6 x 6
Hole
Hooks
Boss
DIO bracket
Assembly")

Board")

Installing position of Hook
6-27