Sony PMW-1000 Service Manual page 125

9. Disconnect the flexible flat cable from the connector on the FP board assembly.
FP support bracket
FP board assembly
Shaft
Shuttle ring
Jog dial assembly
Note
When installing the FP support bracket and FP board assembly, fit the four holes with the two shafts.
10. Release the four claws and open the LCD module in the direction of the arrow.
PMW-1000
PSW2.6 x 6
Hole
Hole
PSW2.6 x 6
Hole
Hole
Flexible flat cable
Connector
Shaft
6-19