Sony PMW-1000 Service Manual page 22

Ref. No. Name
D1003 —
D2103 ST LED0
D2307 PLD1 DEBUG LED0
D2509 POWER LED
D2511 COME CB RESET
D2514 COME ATA_ACT
D2515 COME SUS_STAT
D2516 COME SUS_S3
D2600 Fan Alert
D2601 Rtc Alert
D2602 Tmp Alert
D2607 COME GBE0 LINK100
MEM-138 Board
D104
D103
D102
MEM-138 Board/Side A
Ref. No. Name
D102 +3.3V
D103 ACTIVE
D104 LINK
PMW-1000
Color Description
Green PHOT
Blue For DEBUG (KMBC)
Blue For DEBUG (PRAC)
Blue Lights while the ISPPAC detection
voltage is normal.
Red Lights when the carrier board is reset
by COMe.
Blue Lights when the SATA IF built in
COMe is accessed.
Blue Lights when the SUS_STAT pin level
from COMe is low.
Blue Lights when the SUS_S3 pin level
from COMe is low.
Red Lights when the rotating speed of the
COMe fan decreases to the predeter-
mined speed.
Red Not assigned (lights by software set-
ting)
Red Lights when the board temperature
sensor detects the predetermined tem-
perature or higher.
Blue Lights when the link between COMe
and FP-CPU has been established.
Color Description
Blue Lights while +3.3 V power is turned
on.
Blue Lights when mSATA is accessed.
Blue Lights when mSATA link has been es-
tablished.
Normal state
—
Blinks
Off
Lights
Off
Blinks
Off
Off
Off
Off
Off
Lights
Normal state
Lights
Blinks
Lights
1-12