Power Assembly - Sony PMW-1000 Service Manual

6-8.

Power Assembly

Preparation
1. Remove the top panel assembly. (Refer to
2. Remove the rear panel. (Refer to
Procedure
1. Remove the four screws.
2. Disconnect the power assembly from the two connectors on the CN-3594 board in the direction of the arrow.
Connectors
CN-3594 board
Boss
Note
When installing the power assembly, fit the two bosses with the two holes.
3. Install the removed parts by reversing the steps of removal.
PMW-1000
"6-3. Top Panel Assembly")
"6-7. Rear Panel")
Boss
PSW2.6 x 6
Power assembly
Hole
PSW2.6 x 6
Hole
PSW2.6 x 6
6-9