Table of Contents
Advertisement
136
GETTING TO KNOW YOUR INSTRUMENT PANEL
Rear Seat Belt Reminder Indicator Light —
If Equipped With A Base Instrument
Cluster
This light indicates when a rear seat
belt is unbuckled in the second row.
When the ignition is first placed in the
ON/RUN or ACC/ON/RUN position,
and if a seat belt in the second row is
unbuckled, a light corresponding to the specific
seat will turn on in the upper right portion of the
instrument cluster display, momentarily
replacing the configurable corner information. If
a second row seat belt that was buckled at the
start of the trip is unbuckled, the Rear Seat Belt
Reminder Light will change from the buckled to
the unbuckled symbol, and a chime will sound.
Rear Seat Unoccupied Indicator Light — If
Equipped
This light indicates when the rear
passenger seats are unoccupied, and
will illuminate in the upper right
portion of the instrument cluster
display, momentarily replacing the configurable
corner information.
Cruise Control Ready Indicator Light — If
Equipped With A Premium Instrument
Cluster
This light will turn on when the cruise
control has been turned on, but not
set.
Cruise Control SET Indicator Light — If
Equipped With A Base Instrument Cluster
This indicator light will illuminate
when the cruise control is set.
Cruise Control Ready Indicator Light — If
Equipped With A Base Instrument Cluster
This light will turn on when cruise
control has been turned on, but not
set.
Selec - Speed Control (SSC) Indicator Light
— If Equipped
This light will turn on when Selec -
Speed Control is activated. Selec -
Speed Control is available in 4WD
Low ONLY.
B
I
L
LUE
NDICATOR
IGHTS
High Beam Indicator Light
This indicator light will illuminate to
indicate that the high beam
headlights are on. With the low beams
activated, push the multifunction
lever forward (toward the front of the vehicle) to
turn on the high beams. Pull the multifunction
lever rearward (toward the rear of the vehicle) to
turn off the high beams. If the high beams are
off, pull the lever toward you for a temporary
high beam on, "flash to pass" scenario.
ONBOARD DIAGNOSTIC SYSTEM — OBD II
Your vehicle is equipped with a sophisticated
Onboard Diagnostic system called OBD II. This
system monitors the performance of the
emissions, engine, and transmission control
systems. When these systems are operating
properly, your vehicle will provide excellent
performance and fuel economy, as well as
engine emissions well within current
government regulations.
If any of these systems require service, the
OBD II system will turn on the Malfunction
Indicator Light (MIL). It will also store diagnostic
Hide quick links:
Advertisement
Table of Contents
