Jeep Gladiator 2021 Owner's Manual page 84

82 GETTING TO KNOW YOUR VEHICLE
Removing The Rear Window And Quarter
Panel Cover Assemblies
NOTE:
Both quarter panel cover assemblies and the
rear window must ALL be removed together, or
installed together.
1. Start by removing the rear window first.
Use the two straps located on the bottom
of each side of the rear window to remove
the right and left vertical retainers, as well
as the lower center retainer.
Step One (Right Side Shown)
Step One
2. While keeping the rear window level, slide it
outward in either direction until it is
completely separate from its retainer. Do
not pull downward while removing the rear
window. Damage to the retainer could
result. Store the rear window in the soft top
rear window storage bag (if equipped), or in
a safe location Ú page 83.
Step Two
3. After removing the rear window, remove the
quarter panel cover assemblies starting
with either side. Disengage the quarter
panel cover assembly from the bottom by
pulling the fabric at the bottom upward.