Jeep Gladiator 2021 Owner's Manual page 70

68 GETTING TO KNOW YOUR VEHICLE
Operating Temperature
Temperature
Speaker state (docked or Direct Current
[DC] plugged in)
Speaker state (undocked and running off
battery)
Speaker's Internal Battery Charging
The Jeep® wireless speaker contains a
lithium-ion rechargeable battery. Typical
charging temperatures for these types of
batteries are from 0 to 45°C (32 to 113°F).
NOTE:
The functions described are for when the Jeep®
wireless speaker is undocked from the vehicle.
When plugged into the docking station, the
Jeep® wireless speaker functions as part of the
vehicle's sound system.
Phone & Bluetooth® Pairing
A feature of the Jeep® wireless speaker is the
ability for the Jeep® wireless speaker to
connect to devices using Bluetooth®. Follow
<-4°F -4 to 32°F
(< -20°C) (< -20 to 0°C)
Off On
Off On
No No
these simple steps to connect a
Bluetooth®-enabled device to the Jeep®
wireless speaker:
1. Press and hold the power button for
2-3 seconds to turn the Jeep® wireless
speaker on.
2. Turn "on" Bluetooth® for the device you
desire to be connected to the Jeep®
wireless speaker. For instructions on how to
turn on and off Bluetooth® settings for the
desired device, refer to the device's user
manual.
3. When powered on, the Jeep® wireless
speaker will automatically enter pairing
mode. To pair a second device, press and
hold the Bluetooth® button for 2-3 seconds,
32 to 113°F 115 to 140°F
(0 to 45°C) (46 to 60°C)
On On
On On
Yes No
until an audio cue is heard. Then go to the
devices' Bluetooth® settings and select
"Jeep® Speaker" from the list.
The Jeep® wireless speaker will remember the
last eight devices it has paired with.
NOTE:
If the Jeep® wireless speaker is left on with an
inactive Bluetooth® connection for 30 minutes,
it will automatically turn off. The Jeep® wireless
speaker can be turned on again by pressing and
holding the power button for 2-3 seconds.
>140°F
(>60°C)
Off
Off
No