Blue Indicator Lights; Gray Indicator Lights - Jeep COMPASS 2019 User Manual

If a single lane line is detected, the system is
ready to provide only visual warnings if an
unintentional lane departure occurs on the
detected lane line.
Refer to "LaneSense — If Equipped" in
"Starting And Operating" for further informa-
tion.
— Hill Descent Control (HDC) Indicator
Light — If Equipped
This indicator shows when the Hill Descent
Control (HDC) feature is turned on. The lamp
will be on solid when HDC is armed. HDC can
only be armed when the transfer case is in the
"4WD LOW" position and the vehicle speed
is less then 30 mph (48 km/h). If these
conditions are not met while attempting to
use the HDC feature, the HDC indicator light
will flash on/off.
— Cruise Control Ready Indicator
Light — If Equipped With A Premium Instru-
ment Cluster
This light will turn on when the speed control
has been turned on, but not set. Refer to
64
"Speed Control — If Equipped" in "Starting
And Operating" for further information.
— Cruise Control SET Indicator Light
— If Equipped With Base Instrument Cluster
This indicator light will illuminate when the
speed control is set.
Refer to "Speed Control — If Equipped" in
"Starting And Operating" for further informa-
tion.
— Speed Warning Indicator Light —
If Equipped
When Set Speed Warning is turned on and
when the set speed is exceeded, a single
chime will sound along with pop up message
of "Speed Warning Exceeded." Speed Warn-
ing can be turned on and off in the instru-
ment cluster display.
Refer to "Instrument Cluster Display Menu
Items" in "Getting To Know Your Instrument
Panel" in the Owner's Manual for further
information.
The number "55" is only an example of a
speed that can be set.

Blue Indicator Lights

— High Beam Indicator Light
This indicator light will illuminate to indicate
that the high beam headlights are on. With
the low beams activated, push the multifunc-
tion lever forward (toward the front of the
vehicle) to turn on the high beams. Pull the
multifunction lever rearward (toward the rear
of the vehicle) to turn off the high beams. If
the high beams are off, pull the lever toward
you for a temporary high beam on, "flash to
pass" scenario.

Gray Indicator Lights

— Cruise Control Ready Indicator Light —
If Equipped With Base Instrument Cluster
This light will turn on when the speed control
has been turned on, but not set. Refer to
"Speed Control — If Equipped" in "Starting
And Operating" for further information.
— Active Speed Limiter Ready Indicator
Light — If Equipped With A Base Instrument
Cluster
This light will turn on when the Active Speed
Limiter is on, but not set.