Seats And Fabric Parts - Jeep Gladiator 2021 Owner's Manual

Rear Carpet
1. Remove the grommets under the front seat
(one left and one right).
Carpet Split
1 — Grommet
2. Then pull the carpet out, to the rear and
open the carpet split around the front seat
brackets.
3. Remove the rear Under Seat storage bin (if
equipped), by removing the four bolts that
hold it to the floor.
4. Remove the fastener bin from the rear floor,
it is held in by clips.
5. Remove the jack and tools by turning the
wing bolt counterclockwise, remove the
wing bolt and then lift the assembly out
from under the seat.
6. Lift carpet off of the rear retainers (one left
and one right).
Rear Retainers
7. Remove carpet from the vehicle.
8. When reinstalling the carpet, perform these
steps in reverse order making sure that the
carpet is tucked under the scuffs, B-pillar,
console, and then refasten the grommets.
SERVICING AND MAINTENANCE
S A F P
EATS ND ABRIC ARTS
Use Mopar® Total Clean to clean fabric
upholstery and carpeting.
WARNING!
Do not use volatile solvents for cleaning pur-
poses. Many are potentially flammable, and if
used in closed areas they may cause respira-
tory harm.
Seat Belt Maintenance
CAUTION!
Do not bleach, dye or clean the belts with
chemical solvents or abrasive cleaners. This
will weaken the fabric. Sun damage can also
weaken the fabric
If the belts need cleaning, use a mild soap
solution or lukewarm water. Do not remove the
belts from the vehicle to wash them. Dry with a
soft cloth.
Replace the belts if they appear frayed or worn
or if the buckles do not work properly.
449
8