To Manually Turn On The Stop/Start System; System Malfunction; Cruise Control Systems - If Equipped; Cruise Control - If Equipped - Jeep Gladiator 2021 Owner's Manual

NOTE:
The Stop/Start system will reset itself back to
an ON condition every time the ignition is turned
off and back on.
T M T O T
O ANUALLY URN N HE
S S
TART YSTEM
Push the Stop/Start Off switch (located on the
switch bank). The light on the switch will turn
off.
S M
YSTEM ALFUNCTION
If there is a malfunction in the Stop/Start
system, the system will not shut down the
engine. A "SERVICE STOP/START SYSTEM"
message will appear in the instrument cluster
display Ú page 115.
If the "SERVICE STOP/START SYSTEM"
message appears in the instrument cluster
display, have the system checked by an
authorized dealer.
CRUISE CONTROL SYSTEMS — IF EQUIPPED
Your vehicle may be equipped with the Cruise
Control system, or the Adaptive Cruise Control
(ACC) system:
S /
TOP
Cruise Control for cruising at a constant

preset speed.
Adaptive Cruise Control (ACC) for maintaining

a set distance between you and the vehicle
ahead using Fixed Speed Cruise Control to
automatically adjust the preset speed.
NOTE:
In vehicles equipped with ACC, if an ACC
distance is not set, Fixed Speed Cruise Control
will not detect vehicles directly ahead of you.
Always be aware of the mode selected.
C C
RUISE ONTROL
When engaged, the Cruise Control system takes
over accelerator operations at speeds greater
than 20 mph (32 km/h).
The Cruise Control buttons are located on the
right side of the steering wheel.
1 — SET (+)/Accel
2 — CANC/Cancel
3 — SET (-)/Decel
4 — On/Off
5 — RES/Resume
NOTE:
— I E
F QUIPPED
In order to ensure proper operation, the Cruise
Control system has been designed to shut down
if multiple Cruise Control functions are operated
at the same time. If this occurs, the Cruise
Control system can be reactivated by pushing
the Cruise Control on/off button and resetting
the desired vehicle set speed.
STARTING AND OPERATING 175
Cruise Control Buttons
4