Jeep Gladiator 2021 Owner's Manual page 352

350 SAFETY
Can the LATCH anchorages and the seat belt be
used together to attach a rear-facing or
forward-facing child restraint?
Can a child seat be installed in the center position
using the inner LATCH lower anchorages from the
outboard seating positions?
Can two child restraints be attached using a
common lower LATCH anchorage?
Can the rear-facing child restraint touch the back of
the front passenger seat?
Can the rear head restraints be removed?
Frequently Asked Questions About Installing Child Restraints With LATCH
Do not use the seat belt when you use the LATCH
anchorage system to attach a rear-facing or
forward-facing child restraint.
No
Booster seats may be attached to the LATCH
anchorages if allowed by the booster seat
manufacturer. See your booster seat owner's
manual for more information.
You can install child restraints with flexible lower
anchors in the center position. The inner anchorages
Yes are 19.2 inches (488 mm) apart. Do not install child
restraints with rigid lower anchors in the center
position.
Never "share" a LATCH anchorage with two or more
child restraints. If the center position does not have
dedicated LATCH lower anchorages, use the seat belt
No
to install a child seat in the center position next to a
child seat using the LATCH anchorages in an
outboard position.
The child seat may touch the back of the front
passenger seat if the child restraint manufacturer
Yes
also allows contact. See your child restraint owner's
manual for more information.
The center head restraint can be removed if it
Yes
interferes with the installation of the child restraint.