Jeep Gladiator 2021 Owner's Manual page 371

3. Assemble the jack and jacking tools.
Connect the jack handle driver to the
extension, then to the lug wrench.
Assembled Jack And Tools
4. Operate the jack from the front or the rear of
the vehicle. Place the jack under the axle
tube, as shown. Placement for the front and
rear jacking locations are critical. See below
images for proper jacking locations. Do not
raise the vehicle until you are sure the jack
is fully engaged.
Front Jack Lifting Point
Front Jacking Location
IN CASE OF EMERGENCY
Rear Jack Lifting Point
Rear Jacking Location
CAUTION!
Before raising the wheel off the ground, make
sure that the jack will not damage surround-
ing truck parts and adjust the jack position as
required.
369
7