Jeep Gladiator 2021 Owner's Manual page 109

6. Position both Tonneau Cover latches over
the locking mechanisms (one on each side
of the truck bed), making sure the plastic
retainer is correctly seated in the forward
part of the latch.
Correctly Seated Retainer
Incorrectly Seated Retainer
7. Once the rear Tonneau Cover bar is
positioned over the locking mechanism,
grab the back of the Tonneau Cover and
push downward on the center to engage the
locking mechanisms. Make sure an audible
"click" from both sides of the Tonneau
Cover are heard to confirm that the latch is
completely engaged.
Push Downward To Lock
NOTE:
If desired, the Tonneau Cover can be left in this
position (rear panel folded forward) while the
tailgate is closed, or the tailgate can be raised
to the mid-position Ú page 103.
GETTING TO KNOW YOUR VEHICLE
Tonneau Cover With Tailgate In Mid-Position
8. Fold the rear panel down; the tailgate can
now be raised and secured in place.
NOTE:
If not leaving the tailgate in the mid-position, the
Tonneau Cover must be closed completely prior
to fully closing the tailgate.
CAUTION!
Do not sit on the Tonneau Cover; damage to
the cover and/or cargo will occur.
107
2