The Measurement Option - GE PM880 Operations & Installation Manual

The Measurement Option

On occasion, you might need to change the actual parameter
measured in a given window.The Measurement option enables
you to reconfigure the window with one of five categories of data
source (hygro, temperature, pressure, battery and user function)
and appropriate measurement units.
To enter the Measurement option:
1. Press from the Operate Mode window until you have
[SEL]
reached the desired measurement.
2. Press
[ENTER]
3. Be sure the Measurement option is highlighted, and press
.
[ENTER]
The screen appears similar to Figure 5-5 on page 5-8. The left
column displays the five measurement data sources, while the
right column displays appropriate measurement units.
4. Use the [ ] and [
source, and press
5. Then use the [
measurement unit (or diagnostic parameter). Press
to confirm the entry, or
without making any changes.
6. The screen returns to Operate Mode, and displays any
changes.
Displaying and Configuring Data
to open the Display Menu.
] arrow keys to reach the desired data
[SEL] .
] or [ ] arrow keys to select the desired
, Cancel, to leave the window
[F2]
August 2003
, OK,
[F3]
5-7