GE PM880 Operations & Installation Manual page 120

Setting up User Tables (cont.)
Note: It is not necessary to enter the "#Data Points" or "Max
Points" text boxes.
4. The final prompt asks you to enter or change data in the user
table.
a. Press [ENTER]
similar to Figure 6-12 below.
Programming
Figure 6-10: The Edit User Table Window
b. Use the four arrow keys to move to the desired entry in the
table.
c. Press [ENTER]
desired data, which appears in the right corner of the
window above the table.
d. Press
[ENTER]
the appropriate slot in the table.
Programming Meter Settings
to open the window. The screen appears
Edit User Table 1
UserTable1
1
2
3
4
5
Cancell
. Then use the numeric keys to enter the
to confirm the data, which then appears in
August 2003
Y
OK
6-19