GE PM880 Operations & Installation Manual page 59

August 2003
Entering User Functions (cont.)
d. When you have completed the label, press
confirm the label, or
without adding the label.
3. The next prompt asks for the Units Symbol.
a. Press
[ENTER]
b. Repeat the procedure used for the Label (on the previous
page) to create the Units Symbol.
c. When you have completed the label, press
confirm the symbol, or
without adding the symbol.
4. The next prompt asks you to select the number of decimal
places.
a. Press [ENTER]
b. Scroll to the desired number of decimal places, ranging
from 0 to 4.
c. Press
[ENTER]
5. The final prompt asks for the function itself.
a. Press
[ENTER]
which appears similar to Figure 3-10 on page 3-21.
b. Use the four arrow keys to scroll to the desired function or
table, and press
numeric keys to enter numeric values. Press
to remove any mistaken or unwanted symbols or numbers.
Note: Pressing
set of symbols and functions and a list of user functions.
Use both screens to create the desired function.
3-20
(Cancel) to leave the window
[F2]
to reopen the text creation window.
[F2]
to open the drop-down menu.
to confirm the entry.
to open the function creation window,
to confirm each entry. Use the
[ENTER]
causes the screen to alternate between a
[SEL]
[F3]
[F3]
(Cancel) to leave the window
Programming Site Data
(OK) to
(OK) to
(Delete)
[F1]