GE PM880 Operations & Installation Manual page 36

August 2003
Screen (cont).
The middle of the screen shown in Figure 2-7 on page 2-15 is the
work area, which displays the measured parameters, numeric
measurements, and both bar and line graphs. (When you enter a
selection on the Menu Bar discussed in Chapter 3, Programming
Site Data, this area displays menu prompts.) A line at the bottom
of the area also displays error code messages, which are described
in more detail in Chapter 9, Diagnostics and Troubleshooting.
The system tray displays icons that indicate meter operations not
otherwise shown. Table 2-2 below lists the icons and their
meanings.
Table 2-2: Icons in the System Tray
Icon
The bottom of the screen displays the three function key options:
F1, F2 and F3. These keys have different functions, depending on
the task you are performing.
2-16
Function
IR Transfer
Alert
Log
Backlight
Low Battery
Alert
Snapshot
(To file)
(To Printer)
Meaning
IR data transfer in progress.
Indicates the meter encoun-
tered an error in operation.
Indicates a log is pending (no
marks) or running (marks).
Indicates that backlight has
been activated.
Indicates 10 minutes or less
of battery run time.
Indicates that the Snapshot
function has been activated,
so users can take screen cap-
tures (see page 6-23).
Initial Setup