Resetting To Factory Default Parameters - GE PM880 Operations & Installation Manual

Resetting to Factory Default Parameters

For various reasons, you might wish to return the PM880 to its
original settings. The Factory Defaults option enables you to
return the meter to its preprogrammed default settings. To enter
the option, scroll down to the Factory Defaults entry in the
Service Menu and press
to Figure 8-10 below.
Note: All sites and logs will be lost if you use the Factory
Defaults option. Be sure to transfer or print all sites and
logs before resetting!
*** WARNING ***
You will LOSE all changes by
pressing OK.
Choose CANCEL to exit or OK to
proceed.
Figure 8-10: The Factory Defaults Option
1. To restore Factory Default settings:
•
Press
[F2]
changing the current settings.
•
Press
[F3]
factory default settings.
2. The program asks for confirmation: "Are you SURE?" Repeat
the procedure shown in Step 1 above.
The PM880 replaces the default site file and the global meter
settings with the factory default settings, and returns to Operate
Mode.
Servicing the PM880
[ENTER]
Factory Defaults
Cancel
(Cancel) to return to Operate Mode without
(OK) to confirm that you wish to restore the
. The screen will appear similar
August 2003
OK
8-11