GE PM880 Operations & Installation Manual page 143

Displaying Log Data in Graphical Form (cont.)
-52.0
Limits
Max
Figure 7-14: The Y-Axis Window
The Y-Axis window (shown in Figure 7-14 above) allows you to
specify whether the Y axis on the graph extends to the maximum
value (Max), over the entire range (Range) or between certain
specified values (Set).
1. Use the [ ] and [ ] keys to scroll to the desired limit type.
Press
[ENTER]
If you select Max or Range for limits, you have finished entering
data in this form. But if you select Set, the PM880 asks for
minimum and maximum limits.
2. Press the [ ] key to reach the Minimum text box.
a. Press
[ENTER]
b. Use the numeric keys to enter the desired value.
c. Press
[ENTER]
3. Repeat step 2 to enter the Maximum value.
4. When you have finished, press
entries, or
[F3]
graph.
Logging Data
AAA.LOG (Dew Point, °C)
Y-Axis
Range
Minimum
Maximum
2003/03/01
13:23:41 PM
Cancel
to confirm the entry.
to open the text box.
to confirm the entry.
(OK) to confirm the entries and change the
Set
-52
-52
13:53:41 PM
(Cancel) to cancel the
[F2]
August 2003
2003/03/01
OK
7-21