GE PM880 Operations & Installation Manual page 47

August 2003
Entering Moisture Calibration Data (cont.)
You now have three options:
•
Use the [ ] arrow key to enter another Calibration window
and program additional data (if available, depending on the
probe type).
•
To confirm the data and return to Operate Mode, press
(OK). The PM880 returns to Operate Mode.
•
To leave the window without saving the data, press
(Cancel) or the
Mode.
3-8
key. The PM880 returns to Operate
[ESC]
[F3]
[F2]
Programming Site Data