Table of Contents
Advertisement
Industrial Electronic Devices
NEW CONFIGURATION / OPEN CONFIGURATION:
The
"New
Configuration" button creates the folder which contains the entire device's configuration.
A device's configuration can also be imported or exported:
To clone the configurations of a programmable "EtherNet/IP Master / Modbus TCP
Slave - Converter" in order to configure another device in the same manner, it is
necessary to maintain the folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the
button
"Open
Configuration".
ADFweb.com Srl – IT31010 – Mareno – Treviso
User Manual EtherNet/IP Master / Modbus TCP Slave
Document code: MN67665_ENG
INFO:
www.adfweb.com
Revision 1.000
Page 12 of 25
Phone +39.0438.30.91.31
Advertisement
Table of Contents
