Jeep 2020 RENEGADE Owner's Manual page 85

Fuel Economy
This menu item allows you to view the fuel
economy of the vehicle. The following will
display:
Range (Miles or km)

Current Consumption (mpg or L/100km or

km/l)
Average Consumption (mpg or L/100km or

km/l)
Reset procedure shown at the bottom of the
display.
Trip Info
Push and release the up or down arrow button
until the Trip menu title is displayed in the
instrument cluster display. Toggle the left or
right arrow button to select Trip A or Trip B. The
Trip information will display the following:
Distance – Shows the total distance (mi or

km) traveled for Trip A or Trip B since the last
reset.
Average Fuel Economy – Shows the average

fuel economy (MPG or L/100 km or km/L) of
Trip A or Trip B since the last reset.
Elapsed Time – Shows the total elapsed time

of travel since Trip A or Trip B has been reset.
Hold the OK button to reset feature information.
Stop/Start – If Equipped
Push and release the up or down arrow button
until the Stop/Start menu title is displayed in
the instrument cluster display.
This menu shows messages related to Stop/
Start. Only one message can be viewed at a
time until the condition is cleared. When the
Stop/ Start is engaged (and the engine is off),
the associated hardware telltale is turned on.
Whenever a user pushes the Stop/Start button
on the central stack, a pop up message of the
Stop/Start status will appear on the instrument
cluster display.
Audio
Push and release the up or down arrow button
until the Audio menu title is displayed in the
instrument cluster display.
Stored Messages
Push and release the up or down arrow button
until the Messages Menu Icon is highlighted in
the instrument cluster display. This feature
shows the number of stored warning messages.
GETTING TO KNOW YOUR INSTRUMENT PANEL
Pushing the left or right arrow button will allow
you to scroll through the stored messages.
Screen Setup
This menu item allows you to change the
position of the information on the display.
Display Gears (Vehicles With Reconfigurable
Multi-Functional Display And Automatic
Transmission)
By selecting this item, you can select the display
mode, the particulars relating to the automatic
transmission, and choose between the
following options:
"Single digit"

The right side of the display will show the
letter concerning the automatic transmission
gear selector (P,R,N or D) position. After
approximately two seconds, the letter will be
displayed in a central position.
"Full PRND"

(Default): The letters PRND will display on the
right side, the position assumed by the gear
selector will be highlighted in the display.
During the operation in sequential mode
("AutoStick"), in place of the letter D, the gear
will be will be displayed.
83
3