Jeep 2020 RENEGADE Owner's Manual page 398

396 MULTIMEDIA
Uconnect 4C NAV With 8.4-inch Display
NOTE:
You must have Bluetooth® enabled on your

phone to complete this procedure.
The vehicle must be in PARK or at a standstill.

Follow the steps below to pair your phone:
1. Place the ignition in the ACC or ON/RUN
position.
2. Press the Phone button.
NOTE:
If there are no phones currently connected

with the system, a pop-up will appear asking
if you would like to pair a mobile phone.
This pop-up only appears when the user

enters phone mode and no other device(s)
have previously been paired. If the system
has a phone previously paired, even if no
phone is currently connected with the
system, this pop-up will not appear.
3. Select "Yes" to begin the pairing process.
4. Search for available devices on your
Bluetooth®-enabled mobile phone.
Press the Settings button on your mobile

phone.
Select Bluetooth® and ensure it is

enabled. Once enabled, the mobile
phone will begin to search for Bluetooth®
connections.
5. If "No" is selected, and you still would like to
pair a mobile phone, press the Pairing or
Settings button from the Uconnect Phone
main screen.
Press the Paired Phones and Audio

Devices button and then press Paired
Phones button or press the Paired
Phones button.
Search for available devices on your

Bluetooth®-enabled mobile phone (see
below). When prompted on the phone,
select "Uconnect" and accept the
connection request.
6. Uconnect Phone will display an in-progress
screen while the system is connecting.
7. When your mobile phone finds the
Uconnect system, select "Uconnect."
8. When prompted on the mobile phone,
accept the connection request from
Uconnect Phone.