Gear Selector Override - Jeep 2020 RENEGADE Owner's Manual

274 IN CASE OF EMERGENCY

GEAR SELECTOR OVERRIDE

If a malfunction occurs and the gear selector
cannot be moved out of the PARK position, you
can use the following procedure to temporarily
move the gear selector:
1. Turn the engine OFF.
2. Apply the Electric Park Brake.
3. Carefully separate the gear selector boot
assembly from the bezel.
Gear Selector Bezel Location
Removing Gear Selector Bezel
4. Press and maintain firm pressure on the
brake pedal.
5. Insert a small screwdriver or similar tool
down into the gear selector override access
hole (at the right front corner of the gear
selector assembly), and push and hold the
override release lever down.
Gear Selector Override Location
6. Move the gear selector to the NEUTRAL
position.
7. The vehicle may then be started in
NEUTRAL.
8. Reinstall the gear selector boot on the
bezel.