Table of Contents
Advertisement
WARNING!
Be sure the hood is fully latched before driv-
ing your vehicle. If the hood is not fully
latched, it could open when the vehicle is in
motion and block your vision. Failure to follow
this warning could result in serious injury or
death.
CAUTION!
To prevent possible damage, do not slam the
hood to close it. Lower hood to approximately
12 inches (30 cm) and drop the hood to
close. Make sure hood is fully closed for both
latches. Never drive vehicle unless hood is
fully closed, with both latches engaged.
LIFTGATE
Opening
To unlock the liftgate, use the key fob or
activate the power door lock switches located
on the driver door handle.
To open the liftgate, squeeze the electronic
liftgate release and pull the liftgate open with
one fluid motion.
Liftgate Handle Location
1 — Electronic Liftgate Release
2 — Liftgate Passive Entry Location (If Equipped)
The Liftgate Passive Entry unlock feature is built
into the electronic liftgate release. With a valid
Passive Entry key fob within 5 ft (1.5 m) of the
liftgate, push the electronic liftgate release to
open with one fluid motion.
Emergency Opening
Proceed as follows:
1. Remove the rear shelf (if equipped).
2. Fold the rear seats forward.
3. Using the supplied screwdriver (located
under cargo floor in tool kit), remove the
yellow tab.
GETTING TO KNOW YOUR VEHICLE
Emergency Opening Tab Location
1 — Yellow Tab
4. Insert the screwdriver into the release tab
slot to trigger the release tab of the liftgate.
Emergency Release Tab Slot Location
1 — Release Tab Slot
67
2
Advertisement
Table of Contents
