Table of Contents
Advertisement
50
GETTING TO KNOW YOUR VEHICLE
Icon
Description
Recirculation Button
Push the Recirculation button on the Blower Control knob to change the system between recirculation mode and outside
air mode. The Recirculation LED light illuminates when Recirculation mode is on.
Recirculation can be used when outside conditions, such as smoke, odors, dust, or humidity are present. Recirculation can
be used in all modes except for Defrost. The A/C can be deselected manually without disturbing the mode control selec-
tion. Continuous use of the Recirculation mode may make the inside air stuffy and window fogging may occur. Extended
use of this mode is not recommended.
Rear Defrost Button
Push and release the Rear Defrost Control button on the Mode Control knob to turn on the rear window defroster and the
heated outside mirrors (if equipped). The Rear Defrost indicator illuminates when the Rear Defrost is on.
Temperature Control
Use the Temperature Control Knob to regulate the temperature of the air inside the passenger compartment. Rotating the
knob counterclockwise, from the top center into the blue area of the scale, indicates cooler temperatures. Rotating the
knob clockwise, into the red area, indicates warmer temperature.
Blower Control
Rotate the control knob to regulate the amount of air forced through the ventilation system in any mode. The blower speed
increases as you move the control clockwise from the "O" (off) position.
Modes Control Knob
Air is directed through the floor, defrost, and side window demister outlets. This setting works best in cold or snowy condi-
tions that require extra heat to the windshield. This setting is good for maintaining comfort while reducing moisture on the
windshield.
Advertisement
Table of Contents
