Page 1 2 02 2 C HERO K EE OW NER’ S M ANUAL...
Page 2 This Owner’s Manual illustrates and describes the operation of features and equipment that are either standard or optional on this vehicle. This manual may also include a description of features and equipment that are no longer available or were not ordered on this vehicle.
Page 3: Table Of Contents
TABLE OF CONTENTS INTRODUCTION ..........................8 GETTING TO KNOW YOUR VEHICLE ................. 14 GETTING TO KNOW YOUR INSTRUMENT PANEL ............72 STARTING AND OPERATING ....................90 MULTIMEDIA ..........................149 SAFETY ............................169 IN CASE OF EMERGENCY ....................224 SERVICING AND MAINTENANCE ..................247 TECHNICAL SPECIFICATIONS ....................299 CUSTOMER ASSISTANCE .....................305 INDEX .............................309...
Page 4 INTRODUCTION SEATS ..............30 VEHICLE SECURITY SYSTEM — IF EQUIPPED ..22 To Arm The System .........22 Manual Adjustment (Front Seats) — SYMBOLS KEY............9 To Disarm The System ........22 If Equipped ............30 ROLLOVER WARNING ..........9 Rearming Of The System .........22 Manual Adjustment (Rear Seats)....31 VEHICLE MODIFICATIONS/ALTERATIONS ..
Page 5 HOOD ..............66 EXTERIOR LIGHTS..........43 CLIMATE CONTROLS..........51 Multifunction Lever .........43 Automatic Climate Control Descriptions And Opening The Hood ...........66 Headlight Switch..........44 Functions ............51 Closing The Hood ..........67 Daytime Running Lights (DRLs) — Manual Climate Control Descriptions And LIFTGATE..............67 If Equipped............44 Functions ............54 To Unlock/Open The Liftgate ......67...
Page 6 CRUISE CONTROL SYSTEMS — WARNING LIGHTS AND MESSAGES ....80 AUTOMATIC TRANSMISSION ........95 Red Warning Lights ..........80 Key Ignition Park Interlock.......96 IF EQUIPPED ............107 Yellow Warning Lights ........83 Brake/Transmission Shift Interlock (BTSI) Cruise Control..........107 Yellow Indicator Lights ........86 System ..............96 Adaptive Cruise Control (ACC) ......
Page 7 TRAILER TOWING ..........136 RADIO OPERATION AND MOBILE PHONES ..166 SAFETY TIPS............221 Common Towing Definitions......136 Regulatory And Safety Information ....166 Transporting Passengers......221 Trailer Hitch Classification......138 OFF-ROAD PAGES — IF EQUIPPED....166 Transporting Pets.......... 221 Trailer Towing Weights (Maximum Trailer Safety Checks You Should Make Inside Off-Road Pages Status Bar ......
Page 8 BODYWORK............296 REFUELING IN EMERGENCY – IF EQUIPPED ...239 VEHICLE MAINTENANCE........255 IF YOUR ENGINE OVERHEATS ......240 Engine Oil ............255 Protection From Atmospheric Agents ..296 Engine Oil Filter ..........256 Body And Underbody Maintenance ..... 296 GEAR SELECTOR OVERRIDE ......241 Engine Air Cleaner Filter .......
Page 9 CUSTOMER ASSISTANCE IF YOU NEED ASSISTANCE ........ 305 WARRANTY INFORMATION........306 FCA US LLC Customer Center....... 305 MOPAR® PARTS ..........307 SUGGESTIONS FOR OBTAINING SERVICE FOR FCA Canada Inc. Customer Center....305 REPORTING SAFETY DEFECTS ......307 YOUR VEHICLE ............305 Mexico............305 In The 50 United States And Prepare For The Appointment ......
Page 10: Introduction
For further information, contact an authorized dealer. When it comes to service, remember that authorized dealers know your Jeep® best, have factory-trained technicians, genuine Mopar® parts, and care about your satisfaction.
Page 11: Symbols Key
SYMBOLS KEY ROLLOVER WARNING Utility vehicles have a significantly higher rollover rate than other types of These statements are against operating vehicles. This vehicle has a higher ground clearance and a higher center of WARNING! procedures that could result in a collision, bodily injury and/or death.
Page 12: Vehicle Modifications/Alterations
VEHICLE MODIFICATIONS/ALTERATIONS Red Warning Lights WARNING! Battery Charge Warning Light Ú page 81 Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. Door Open Warning Light Ú...
Page 13 Red Warning Lights Yellow Warning Lights Oil Temperature Warning Light Electronic Stability Control (ESC) OFF Warning Light Ú page 83 Ú page 84 Transmission Temperature Warning Light Low Fuel Warning Light Ú page 83 Ú page 84 Vehicle Security Warning Light Low Washer Fluid Warning Light Ú...
Page 14 Yellow Warning Lights Yellow Indicator Lights Service Stop/Start System Warning Light Water In Fuel Indicator Light Ú page 85 Ú page 86 Cruise Control Fault Warning Light Green Indicator Lights Ú page 85 Adaptive Cruise Control (ACC) Set With Target Vehicle Light Tire Pressure Monitoring System (TPMS) Warning Light Ú...
Page 15 Green Indicator Lights White Indicator Lights Stop/Start Active Indicator Light Selec-Speed Control Indicator Light Ú page 87 Ú page 88 Turn Signal Indicator Lights Cruise Control Ready Indicator Light Ú page 87 Ú page 88 White Indicator Lights Blue Indicator Lights Hill Descent Control (HDC) Indicator Light High Beam Indicator Light Ú...
Page 16: Getting To Know Your Vehicle
GETTING TO KNOW YOUR VEHICLE KEYS Your vehicle may be equipped with a keyless ignition key fob that supports Passive Entry, Remote Keyless Entry (RKE), Keyless Enter ‘n Go™ (if equipped), Remote Start (if equipped), and Your vehicle may be equipped with a standard power liftgate operation.
Page 17 GETTING TO KNOW YOUR VEHICLE Improper disposal of key fob batteries may be display along with an interior chime. An exterior  harmful to the environment. Please see an audible and visual alert will also be activated to authorized dealer for proper battery disposal warn the driver.
Page 18 GETTING TO KNOW YOUR VEHICLE 1. Remove the emergency key by sliding the 2. Separating key fob halves requires screw WARNING! mechanical latch on the back of the key fob removal (if equipped), and gently prying the sideways with your thumb and then pulling two halves of the key fob apart.
Page 19: Sentry Key
GETTING TO KNOW YOUR VEHICLE IGNITION SWITCH Duplication of key fobs may be performed at an problem with the electronics. In addition, if the light begins to flash after the bulb check, it indicates authorized dealer. This procedure consists of programming a blank key fob to the vehicle that someone attempted to start the engine with (IGNM) —...
Page 20: If Equipped
GETTING TO KNOW YOUR VEHICLE ‘ ™ I The push button ignition can be placed in the EYLESS NTER GNITION following modes: QUIPPED This feature allows the driver to operate the The engine is stopped  ignition switch with the push of a button as long as Some electrical devices (e.g.
Page 21: Remote Start - If Equipped
GETTING TO KNOW YOUR VEHICLE NOTE: NOTE: WARNING! Obstructions between the vehicle and key fob may For information on normal starting, see  reduce this range Ú page 308. Allowing children to be in a vehicle unattended  Ú page 90. is dangerous for a number of reasons.
Page 22: To Exit Remote Start Mode
GETTING TO KNOW YOUR VEHICLE NOTE: Brake switch inactive (brake pedal not pressed)  EMOTE TART With Remote Start, the engine will only run for Battery at an acceptable charge level   To drive the vehicle after starting the Remote Start 15 minutes.
Page 23: Remote Start Front Defrost Activation - If Equipped
GETTING TO KNOW YOUR VEHICLE Automatic Temperature Control (ATC) — Remote Start mode, and exit automatic override. EMOTE TART RONT EFROST If Equipped This includes the OFF button on the climate — I CTIVATION QUIPPED controls, which will turn the system off. The climate controls automatically adjust to the When Remote Start is active, and the outside optimal temperature and mode settings...
Page 24: Vehicle Security System - If Equipped
GETTING TO KNOW YOUR VEHICLE VEHICLE SECURITY SYSTEM — IF EQUIPPED Push the lock button on the exterior Passive The Vehicle Security system is designed to protect  Entry door handle with a valid key fob avail- your vehicle. However, you can create conditions The Vehicle Security system monitors the vehicle able in the same exterior zone Ú...
Page 25: Doors
GETTING TO KNOW YOUR VEHICLE DOORS OWER OCKS WARNING! The power door lock switches are located on each For personal security and safety in the event ANUAL OCKS  front door panel. Push the switch to lock or unlock of a collision, lock the vehicle doors before you the doors.
Page 26: Keyless Enter N G O Passive Entry
GETTING TO KNOW YOUR VEHICLE NOTE: If the door lock switch is pushed while the ignition The key fob may not be detected by the vehicle  is in the ACC or ON/RUN position and the driver's Passive Entry system if it is located next to a Either the driver door only or all doors will unlock ...
Page 27 GETTING TO KNOW YOUR VEHICLE NOTE: NOTE: The vehicle will only unlock the doors when a valid The liftgate Passive Entry lock button will lock all Passive Entry key fob is detected inside the doors and the liftgate. vehicle. The vehicle will not unlock the doors when any of the following conditions are true: The doors are manually locked using the door ...
Page 28: Automatic Unlock Doors On Exit
GETTING TO KNOW YOUR VEHICLE — NOTE: UTOMATIC OCKS After pushing the door handle button, you must  QUIPPED wait two seconds before you can lock or unlock The auto door lock feature default condition is the doors, using either Passive Entry door enabled.
Page 29: Steering Wheel
GETTING TO KNOW YOUR VEHICLE — EATED TEERING HEEL WARNING! QUIPPED Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be The steering wheel contains a heating opened from the outside when the Child-Protec- element that helps warm your hands in tion Door Lock system is engaged (locked).
Page 30: Uconnect Voice Recognition
GETTING TO KNOW YOUR VEHICLE Helpful hints for using Voice Recognition: WARNING! Reduce background noise. Wind noise and  Persons who are unable to feel pain to the  passenger conversations are examples of noise skin because of advanced age, chronic illness, that may impact recognition.
Page 31: Additional Information
GETTING TO KNOW YOUR VEHICLE The memory settings switch is located on the 2. Adjust all memory profile settings to desired DDITIONAL NFORMATION driver’s door trim panel. The switch consists of preferences (i.e., seat, side mirror and radio © 2021 FCA US LLC. All rights reserved. Mopar and three buttons: station presets).
Page 32: Memory Position Recall
GETTING TO KNOW YOUR VEHICLE SEATS 3. Push and release the set (S) button on the memory switch, then within five seconds push Seats are a part of the Occupant Restraint system and release the button (1) or (2) accordingly. of the vehicle.
Page 33: Manual Adjustment (Rear Seats)
GETTING TO KNOW YOUR VEHICLE ANUAL DJUSTMENT EATS WARNING! WARNING! Do not ride with the seatback reclined so that Seats should be adjusted before fastening the   WARNING! the shoulder belt is no longer resting against seat belts and while the vehicle is parked. Do not pile luggage or cargo higher than the top your chest.
Page 34 GETTING TO KNOW YOUR VEHICLE Rear Seat Recline Adjustment 60/40 Split Folding Rear Seat With Fold-Flat Feature The rear seatback also reclines for additional passenger comfort. On vehicles equipped with a To provide additional storage area, each rear seat sliding rear seat, pull on the pull strap while sitting can be folded flat.
Page 35: Power Adjustment (Front Seats)
GETTING TO KNOW YOUR VEHICLE ) — TO LOWER THE REAR SEAT 2. Fold the rear seatback completely forward. OWER DJUSTMENT RONT EATS 1. Lift the seatback release lever located on the QUIPPED NOTE: upper outer edge of the seat. If your vehicle is You may experience deformation in the seat Some models may be equipped with a power equipped with a sliding rear seat, you can also...
Page 36 GETTING TO KNOW YOUR VEHICLE Adjusting The Seat Forward Or Rearward Easy Entry/Exit Seat — If Equipped WARNING! The seat can be adjusted both forward and This feature provides automatic driver seat Do not ride with the seatback reclined so that rearward by pushing the seat switch in the desired positioning to enhance driver mobility when the shoulder belt is no longer resting against...
Page 37: Heated Seats - If Equipped
GETTING TO KNOW YOUR VEHICLE — I Turning the heating elements off will return the Push the heated seat button once to turn the HI EATED EATS QUIPPED  user to the radio screen. setting on. WARNING! Press the heated seat button once to turn the HI Push the heated seat button a second time to ...
Page 38: Head Restraints
GETTING TO KNOW YOUR VEHICLE NOTE: NOTE: The engine must be running for the ventilated Do not reverse the head restraints (making the rear seats to operate. of the head restraint face forward) in an attempt to gain additional clearance to the back of your head. For information on use with the Remote Start Reactive Head Restraints —...
Page 39 GETTING TO KNOW YOUR VEHICLE NOTE: WARNING! To remove the head restraint, raise it as far as it  Do not place items over the top of the Reac-  can go. Then, push the release button and the tive Head Restraint, such as coats, seat adjustment button at the base of each post covers or portable DVD players.
Page 40: Mirrors
GETTING TO KNOW YOUR VEHICLE MIRRORS The single ball joint is a twist-on mirror that has The automatic dimming feature can be turned on  a fixed position at the windshield. The mirror or off through the touchscreen, or using the power installs on the windshield button with a counter- button on the base of the mirror.
Page 41: Outside Mirrors
GETTING TO KNOW YOUR VEHICLE — I Sun Visor “Slide-On-Rod” Feature OWER IRRORS EATED IRRORS QUIPPED The sun visor “Slide-On-Rod” feature allows for The power mirror control switch is located on the These mirrors are heated to melt frost or additional flexibility in positioning the sun visor to driver's side door trim panel.
Page 42: Before You Begin Programming
GETTING TO KNOW YOUR VEHICLE security systems. The HomeLink® unit is It is recommended that you erase all the channels Rolling Code Devices powered by your vehicle’s 12 Volt battery. of your HomeLink® before you use it for the first To determine if your device has a rolling code, a time.
Page 43: Miscellaneous Device
GETTING TO KNOW YOUR VEHICLE 1. Place the ignition switch into the ON/RUN 2. Return to the vehicle and push the WARNING! position. programmed HomeLink® button three times (holding the button for two seconds each Do not run your vehicle in a closed garage or ...
Page 44: Reprogramming A Single Homelink
GETTING TO KNOW YOUR VEHICLE 5. Push and hold the programmed HomeLink® during programming. Similar to this Canadian law, EPROGRAMMING INGLE some U.S. gate operators are designed to time-out button and observe the indicator light. ® B UTTON in the same manner. NOTE: To reprogram a single HomeLink®...
Page 45: Security
GETTING TO KNOW YOUR VEHICLE EXTERIOR LIGHTS If you have any problems, or require assistance, ECURITY please call toll-free 1-800-355-3515 or, on the It is advised to erase all channels before you sell or Internet at HomeLink.com for information or ULTIFUNCTION EVER turn in your vehicle.
Page 46: Headlight Switch
GETTING TO KNOW YOUR VEHICLE NOTE: EADLIGHT WITCH For vehicles sold in Canada, rotate the headlight The headlight switch is located on the left side of switch clockwise from the parking lights and the instrument panel. This switch controls the instrument panel lights position to the first detent operation of the headlights, parking lights, to turn the headlight switch to the AUTO position.
Page 47: High/Low Beam Switch
GETTING TO KNOW YOUR VEHICLE — I Broken, muddy, or obstructed headlights and WITCH UTOMATIC EADLIGHTS QUIPPED  taillights of vehicles in the field of view will After the low beam headlights are turned on, push This system automatically turns the headlights on cause headlights to remain on longer (closer to the multifunction lever, located on the left side of or off according to ambient light levels.
Page 48: Automatic Headlights With Wipers
GETTING TO KNOW YOUR VEHICLE If you turn the headlights or parking lights on, or UTOMATIC EADLIGHTS place the ignition in ACC or RUN, the system will — I IPERS QUIPPED cancel the delay. When this feature is programmed on and the If you turn the headlights off before the ignition, headlight switch is set to AUTO, the headlights will they will turn off in the normal manner.
Page 49: Turn Signals
GETTING TO KNOW YOUR VEHICLE An indicator light in the instrument cluster automatic battery protection is enabled (lights off), ATTERY AVER illuminates when the fog lights are turned on. either place the ignition in the ON/RUN position or Timers are set to both the interior and exterior cycle the light switch.
Page 50 GETTING TO KNOW YOUR VEHICLE Instrument Panel Dimmer Control The instrument panel dimmer control is part of the headlight switch and is located on the driver’s side of the instrument panel. With the parking lights or headlights on, rotating the instrument panel dimmer control upward to the first detent will increase the brightness of text displays such as the odometer, instrument cluster display, and radio.
Page 51: Illuminated Entry
GETTING TO KNOW YOUR VEHICLE Intermittent Wipers LLUMINATED NTRY Use one of the four intermittent wiper settings The courtesy lights will turn on when you use the when weather conditions make a single wiping key fob to unlock the doors or open any door. cycle, with a variable delay between cycles, The lights will fade to off after approximately desirable.
Page 52: Rain Sensing Wipers - If Equipped
GETTING TO KNOW YOUR VEHICLE Mist Use of Rain-X or products containing wax or sili-  INDOW IPER ASHER cone may reduce Rain Sensing performance. Push the lever upward to the MIST position and The rear wiper/washer controls are located on the release for a single wiping cycle.
Page 53: Windshield Wiper De-Icer - If Equipped
GETTING TO KNOW YOUR VEHICLE — A/C Button INDSHIELD IPER UTOMATIC LIMATE ONTROL Press and release this button on the QUIPPED ESCRIPTIONS UNCTIONS touchscreen, or push the button on the Your vehicle may be equipped with a Windshield faceplate to change the current setting. Wiper De-Icer feature that may be activated under The A/C indicator illuminates when A/C is the following conditions:...
Page 54 GETTING TO KNOW YOUR VEHICLE In cold weather, use of Recirculation mode may from the windshield and side window demist CAUTION! lead to excessive window fogging. The outlets. When the defrost button is selected, the Recirculation feature may be unavailable if blower level may increase.
Page 55 GETTING TO KNOW YOUR VEHICLE SYNC Button Touchscreen NOTE: Bi-Level mode is designed under comfort condi- Use the small blower icon to reduce the blower Press the SYNC button on the tions to provide cooler air out of the panel outlets setting and the large blower icon to increase the touchscreen to toggle the SYNC feature and warmer air from the floor outlets.
Page 56: Manual Climate Control Descriptions And
GETTING TO KNOW YOUR VEHICLE faceplate to change the current setting. The A/C can be deselected manually without disturbing the ANUAL LIMATE ONTROL indicator illuminates when A/C is on. mode control selection. Continuous use of the ESCRIPTIONS UNCTIONS Recirculation mode may make the inside air stuffy NOTE: and window fogging may occur.
Page 57 GETTING TO KNOW YOUR VEHICLE Rear Defrost Button Driver And Passenger Temperature NOTE: The SYNC button is only available on the touch- Control Buttons Press and release the Rear Defrost screen. button on the touchscreen, or push and These buttons provide the driver and Blower Control release the button on the faceplate, to passenger with independent...
Page 58: Automatic Temperature Control (Atc)
GETTING TO KNOW YOUR VEHICLE Panel Mode Mix Mode 3. When the system is set up for your comfort level, it is not necessary to change the Air comes from the outlets in the Air is directed through the floor, defrost, settings.
Page 59: Climate Voice Commands
GETTING TO KNOW YOUR VEHICLE Winter Operation Cabin Air Filter LIMATE OICE OMMANDS To ensure the best possible heater and defroster The Climate Control system filters out dust and Adjust vehicle temperatures hands-free and keep performance, make sure the engine cooling pollen from the air.
Page 60: Interior Storage And Equipment
GETTING TO KNOW YOUR VEHICLE Activation By Remote Start Operation  WEATHER CONTROL SETTINGS When the Remote Start is activated and the Set the mode control to outside ambient temperature is less than 33°F Cool & Humid (Floor Mode) and (0.6°C) the windshield wiper de-icer will acti- Conditions turn on...
Page 61: Sun Visors
GETTING TO KNOW YOUR VEHICLE Console Storage Compartment Instrument Panel Cubby To close the instrument panel cubby, push down on the door until it latches. The center console has both an upper and lower Your vehicle may be equipped with an instrument storage area which can hold cell phones, PDAs, panel cubby.
Page 62: Aux/Usb Control
GETTING TO KNOW YOUR VEHICLE AUX/USB C ONTROL OWER UTLETS Your vehicle is equipped with 12 Volt (13 Amp) power outlets that can be used to power cellular phones, small electronics, and other low powered electrical accessories. The power outlets are labeled with either a “key”...
Page 63 GETTING TO KNOW YOUR VEHICLE A second fused 12 Volt power outlet is located on WARNING! the left quarter trim panel in the cargo area. This power outlet has power available when the ignition If this outlet is mishandled, it may cause an ...
Page 64: Power Inverter - If Equipped
GETTING TO KNOW YOUR VEHICLE WINDOWS — I To turn on the power inverter outlet, simply plug in OWER NVERTER QUIPPED the device. The outlet automatically turns off when the device is unplugged. OWER INDOW ONTROLS The power inverter is designed with built-in The power window switches on the driver's door overload protection.
Page 65: Automatic Window Features
GETTING TO KNOW YOUR VEHICLE To open the window part way (manually), push the NOTE: UTOMATIC INDOW EATURES window switch down briefly and release. Any impact due to rough road conditions may Auto-Down Feature trigger the auto-reverse function unexpectedly NOTE: during auto-closure.
Page 66: Window Lockout Switch
GETTING TO KNOW YOUR VEHICLE windows open, open the front and rear windows INDOW OCKOUT WITCH together to minimize the buffeting. If the buffeting The window lockout switch on the driver's door trim occurs with the sunroof open, adjust the sunroof panel allows you to disable the window controls on opening to minimize the buffeting or open any the rear passenger doors.
Page 67: Opening And Closing The Sunroof
GETTING TO KNOW YOUR VEHICLE Push the switch forward to close and release it The switch must be actuated again to continue on WARNING! within one-half second and the sunroof will close to full open position. automatically from any position. The sunroof will In a collision, there is a greater risk of being ...
Page 68: Pinch Protect Feature
GETTING TO KNOW YOUR VEHICLE Manual Open/Close ENTING UNROOF Push and hold the sunshade switch rearward to Push and release the Vent switch within one-half open. The shade will open to the half open position second and the sunroof will open to the vent and stop automatically.
Page 69: Closing The Hood
GETTING TO KNOW YOUR VEHICLE The power liftgate may also be opened or closed by LOSING pushing the liftgate button located on the In one continuous motion, pull down on the front instrument panel to right of the headlight switch. If edge of the hood with moderate force until the the liftgate is fully open, the liftgate can be closed angle is below the point where the gas props are no...
Page 70: To Lock/Close The Liftgate
GETTING TO KNOW YOUR VEHICLE Power Liftgate Malfunction Procedure: LOSE IFTGATE 1. In the event of a power malfunction to the There are several different ways to close the liftgate, the liftgate can be released by liftgate: accessing the service release feature in the Manually by grabbing the liftgate closing handle ...
Page 71 GETTING TO KNOW YOUR VEHICLE To open or close the liftgate using hands-free The Hands-Free Liftgate feature can be acti-  WARNING! activation, use a straight in and out kicking motion vated by any metallic object making a similar under the vehicle activation zone in the general in-and-out motion under the rear fascia/ Driving with the liftgate open can allow ...
Page 72: Cargo Area Features
GETTING TO KNOW YOUR VEHICLE Cargo Tie-Down Hooks And Loops ARGO EATURES WARNING! The tie-downs located on the cargo area floor Cargo Load Floor The weight and position of cargo and should be used to secure loads safely when the The cargo load floor system has a load capacity of passengers can change the vehicle center of vehicle is moving.
Page 73: Roof Luggage Rack - If Equipped
GETTING TO KNOW YOUR VEHICLE Rear Storage Bins WARNING! CAUTION! The rear storage bins are located in the rear of the Cargo must be securely tied down before driving Travel at reduced speeds and turn corners  vehicle on the sides of the load floor. your vehicle.
Page 74: Getting To Know Your Instrument Panel
GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER...
Page 75 GETTING TO KNOW YOUR INSTRUMENT PANEL...
Page 76: Instrument Cluster Descriptions
GETTING TO KNOW YOUR INSTRUMENT PANEL kilometers in the odometer. The steering wheel NSTRUMENT LUSTER ESCRIPTIONS CAUTION! mounted controls allow you to scroll through and 1. Tachometer enter the main menus and submenus. Driving with a hot engine cooling system could Indicates the engine speed in revolutions damage your vehicle.
Page 77: Oil Life Reset - If Equipped
GETTING TO KNOW YOUR INSTRUMENT PANEL The instrument cluster display menu items may menu item. To reset displayed/selected 1 — Left Arrow Button consist of the following: features push and hold the OK button for two 2 — Up Arrow Button seconds.
Page 78: Instrument Cluster Display Menu Items
GETTING TO KNOW YOUR INSTRUMENT PANEL Vehicle Info Driver Assist Secondary Method For Oil Change Reset Procedure Push and release the up or down arrow Push and release the up or down arrow 1. Without pushing the brake pedal, place the button until the Vehicle Info menu icon is displayed button until the Driver Assist menu title is ignition in the ON/RUN position (do not start...
Page 79 GETTING TO KNOW YOUR INSTRUMENT PANEL ACC SET the left or right arrow button to select the instrument cluster display. Toggle the left screen with or without current fuel economy When ACC is set, the set speed will display in the right arrow button to select Trip A or Trip B.
Page 80 GETTING TO KNOW YOUR INSTRUMENT PANEL Screen Setup Speed Warning Favorite Menus Push and release the up or down arrow Push and release the up or down arrow Audio (Stored) Screen Setup button until the Screen Setup Menu Icon/Title is button until the Speed Warning Menu icon/title is (show/hide) Messages...
Page 81: Battery Saver On/Battery Saver Mode Message - Electrical Load Reduction Actions - If Equipped
GETTING TO KNOW YOUR INSTRUMENT PANEL NOTE: Turning on all possible vehicle electrical loads ATTERY AVER ATTERY AVER  (e.g. HVAC to max settings, exterior and interior — E The charging system is independent from load  ESSAGE LECTRICAL lights, overloaded power outlets +12 Volts, reduction.
Page 82: Warning Lights And Messages
GETTING TO KNOW YOUR INSTRUMENT PANEL WARNING LIGHTS AND MESSAGES Air Bag Warning Light What to do when an electrical load reduction action message is present (“Battery Saver On” or This warning light will illuminate to The warning/indicator lights will illuminate in the “Battery Saver Mode”) indicate a fault with the air bag, and will instrument panel together with a dedicated...
Page 83 GETTING TO KNOW YOUR INSTRUMENT PANEL been corrected. If the problem is related to the Vehicles equipped with the Anti-Lock Brake System This indicates a possible problem with the brake booster, the ABS pump will run when (ABS) are also equipped with Electronic Brake electrical system or a related component.
Page 84 GETTING TO KNOW YOUR INSTRUMENT PANEL Electronic Throttle Control (ETC) Warning Engine Coolant Temperature Warning Oil Pressure Warning Light Light Light This warning light will illuminate to indicate low engine oil pressure. A chime This warning light will illuminate to This light warns of an overheated engine will sound when this light turns on and a indicate a problem with the ETC system.
Page 85: Yellow Warning Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL Oil Temperature Warning Light Anti-Lock Brake System (ABS) Warning CAUTION! Light This warning light will illuminate to Continuous driving with the Transmission indicate the engine oil temperature is This warning light monitors the ABS. The Temperature Warning Light illuminated will high.
Page 86 GETTING TO KNOW YOUR INSTRUMENT PANEL Low Washer Fluid Warning Light — several ignition cycles, and the vehicle has been Certain conditions, such as a loose or missing gas driven several miles (kilometers) at speeds greater cap, poor quality fuel, etc., may illuminate the light If Equipped than 30 mph (48 km/h), see an authorized dealer after engine start.
Page 87 GETTING TO KNOW YOUR INSTRUMENT PANEL Service 4WD Warning Light — If Equipped Tire Pressure Monitoring System (TPMS) vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure Warning Light This warning light will illuminate to signal for those tires.
Page 88: Yellow Indicator Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL Wait To Start Light — If Equipped the malfunction indicator is illuminated, the ELLOW NDICATOR IGHTS system may not be able to detect or signal low tire This indicator light will illuminate for Active Speed Limiter Fault Indicator pressure as intended.
Page 89: Green Indicator Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL LaneSense Indicator Light — If Equipped NOTE: REEN NDICATOR IGHTS A continuous chime will sound if the vehicle is The LaneSense indicator light illuminates  Active Speed Limiter SET Indicator Light driven more than 1 mile (1.6 km) with either solid green when both lane markings This light will turn on when the Active turn signal on.
Page 90: Blue Indicator Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL ONBOARD DIAGNOSTIC SYSTEM — OBD II LaneSense Indicator Light — If Equipped To activate “Selec-Speed Control”, ensure the vehicle is in Four - Wheel Drive (4WD) Low and When the LaneSense system is ON, but Your vehicle is equipped with a sophisticated push the button on the Instrument Panel.
Page 91: Onboard Diagnostic System (Obd Ii) Cybersecurity
GETTING TO KNOW YOUR INSTRUMENT PANEL EMISSIONS INSPECTION AND 2. As soon as you cycle the ignition switch to the NBOARD IAGNOSTIC YSTEM ON position, you will see the Malfunction (OBD II) C YBERSECURITY MAINTENANCE PROGRAMS Indicator Light symbol come on as part of a normal bulb check.
Page 92: Starting And Operating
STARTING AND OPERATING STARTING THE ENGINE NOTE: WARNING! Only press one pedal at a time while driving the Before starting your vehicle, adjust your seat, vehicle. Torque performance of the vehicle could Do not leave the key fob in or near the vehicle, ...
Page 93: Extreme Cold Weather (Below -20°F Or −29°C)
STARTING AND OPERATING XTREME EATHER FTER TARTING CAUTION! –20°F O −29°C) ELOW The idle speed is controlled automatically, and it To prevent damage to the starter, do not crank will decrease as the engine warms up. To ensure reliable starting at these temperatures, continuously for more than 10 seconds at a time.
Page 94: Engine Break-In Recommendations
STARTING AND OPERATING 3. Pull the cord to the front of the vehicle and plug While cruising, brief full-throttle acceleration within The parking brake is primarily intended to prevent it into a grounded, three-wire extension cord. the limits of local traffic laws contributes to a good the vehicle from rolling while parked.
Page 95 STARTING AND OPERATING and an indicator on the switch will illuminate. If your brake is fully disengaged, the BRAKE telltale light WARNING! in the instrument cluster and the LED indicator on foot is on the brake pedal while you apply the parking brake, you may notice a small amount of the switch will extinguish.
Page 96 STARTING AND OPERATING Auto Park Brake If exceptional circumstances should make it SafeHold can be temporarily bypassed by pressing necessary to engage the parking brake while the the brake pedal and pushing the EPB Switch while The EPB can be programmed to be applied vehicle is in motion, maintain upward pressure on the driver door is open.
Page 97: Automatic Transmission
STARTING AND OPERATING While in Maintenance Mode, the EPB fault lamp WARNING! WARNING! will flash continuously while the ignition is ON. It is dangerous to shift out of PARK (P) or Never use the PARK position as a substitute  ...
Page 98: Key Ignition Park Interlock
STARTING AND OPERATING the ON/RUN position (engine running or not) and The electronically controlled transmission adapts CAUTION! the brake pedal must be pressed. its shift schedule based on driver inputs, along with environmental and road conditions. Damage to the transmission may occur if the The brake pedal must also be pressed to shift from following precautions are not observed: NEUTRAL into DRIVE or REVERSE when the vehicle...
Page 99: Gear Ranges
STARTING AND OPERATING NOTE: PARK (P) WARNING! If the gear selector cannot be moved to the PARK, This range supplements the parking brake by REVERSE, or NEUTRAL position (when pushed Your vehicle could move and injure you and  locking the transmission. The engine can be forward), it is probably in the MANUAL (AutoStick [+/-]) others if it is not in PARK.
Page 100 STARTING AND OPERATING WARNING! CAUTION! WARNING! Do not coast in NEUTRAL and never turn off the When leaving the vehicle, always make sure DO NOT race the engine when shifting from   ignition to coast down a hill. These are unsafe the ignition is in the OFF position, remove the PARK or NEUTRAL into another gear range, as key fob from the vehicle, and lock the vehicle.
Page 101 STARTING AND OPERATING gear will improve performance and extend SPORT — If Equipped 6. Shift into the desired gear range. If the problem is no longer detected, the transmission life by reducing excessive shifting This mode alters the transmission's automatic and heat buildup.
Page 102: Four-Wheel Drive Operation
STARTING AND OPERATING NOTE: Transmission shifting will be more noticeable speed is higher when the torque converter clutch is  when AutoStick is enabled. not engaged, it may seem as if the transmission is In AutoStick mode, the transmission will only shift not shifting properly when cold.
Page 103: 2-Speed Four-Wheel Drive (4Wd) - If Equipped
STARTING AND OPERATING The Four-Wheel Drive is fully automatic in the PEED HEEL RIVE HIFT OSITIONS normal driving mode. The Selec-Terrain buttons (4WD) — I QUIPPED For additional information on the appropriate use provide three selectable mode positions: of each 4WD system mode position, see the 4WD LOW ...
Page 104: Shifting Procedures
STARTING AND OPERATING — NOTE: front and rear wheels while providing maximum LECTRONIC OCKER YSTEM pulling power for loose, slippery road surfaces only. If shift conditions/interlocks are not met, a QUIPPED Do not exceed 25 mph (40 km/h). message will flash from the instrument cluster display with instructions on how to complete the The Rear Electronic Locker System features a NOTE:...
Page 105: Selec-Terrain
STARTING AND OPERATING Deactivating The Rear Electronic Locker System Shifting into or out of Rear Electronic Locker is  possible with the vehicle completely stopped; To deactivate the Rear Electronic Locker System, however, difficulty may occur due to the mating the following conditions must be met: clutch teeth not being properly aligned.
Page 106: Power Steering
STARTING AND OPERATING NOTE: Instrument Cluster Display Messages system. You will lose power steering assistance momentarily until the over temperature condition SPORT mode is not available when 4WD LOW is When the appropriate conditions exist, a message no longer exists. Once driving conditions are safe, selected.
Page 107: Autostop Mode
STARTING AND OPERATING HVAC is set to MAX A/C UTOSTOP OSSIBLE EASONS NGINE  Engine has not reached normal operating UTOSTOP  The Stop/Start feature is enabled after every temperature normal customer engine start. At that time, the Prior to engine shut down, the system will check The transmission is not in a forward or reverse system will go into STOP/START READY.
Page 108: To Start The Engine While In Autostop Mode
STARTING AND OPERATING Conditions That Force An Application Of The Push the Stop/Start OFF switch (located on the TART NGINE HILE Electric Park Brake While In Autostop Mode: switch bank). The light on the switch will illuminate. UTOSTOP The “STOP/START OFF” message will appear in the The driver’s door is open and brake pedal ...
Page 109: Cruise Control Systems - If Equipped
STARTING AND OPERATING CRUISE CONTROL SYSTEMS — IF EQUIPPED WARNING! Your vehicle may be equipped with the Cruise Cruise Control can be dangerous where the Control system, or the Adaptive Cruise Control system cannot maintain a constant speed. Your (ACC) system: vehicle could go too fast for the conditions, and you could lose control and have an accident.
Page 110 STARTING AND OPERATING To Set A Desired Speed To Resume Speed If the button is continually pushed, the set speed  will continue to adjust until the button is released, Turn the Cruise Control on. When the vehicle has To resume a previously set speed, push the RES then the new set speed will be established.
Page 111: Adaptive Cruise Control (Acc)
STARTING AND OPERATING (ACC) DAPTIVE RUISE ONTROL WARNING! WARNING! Adaptive Cruise Control (ACC) increases the driving Adaptive Cruise Control (ACC) is a conve- Will bring the vehicle to a complete stop   convenience provided by Cruise Control while nience system. It is not a substitute for active and hold the vehicle in the stop position traveling on highways and major roadways.
Page 112 STARTING AND OPERATING Adaptive Cruise Control (ACC) Operation Activating Adaptive Cruise Control (ACC) Push the Adaptive Cruise Control (ACC) on/off button until one of the following appears in the The buttons on the right side of the steering wheel The minimum set speed for the ACC system is instrument cluster display: operate the ACC system.
Page 113 STARTING AND OPERATING To Activate/Deactivate Pushing the Fixed Speed Cruise Control on/off message “DRIVER OVERRIDE” will display in the button will result in turning on (changing to) Fixed instrument cluster display. Push and release the Adaptive Cruise Control Speed Cruise Control mode. If you continue to accelerate beyond the set (ACC) on/off button.
Page 114 STARTING AND OPERATING NOTE: The following conditions will only cancel the ACC U.S. Speed (mph) system: If your vehicle stays at standstill for longer than Pushing the SET (+), or SET (-) button once will   two seconds, then the driver will either have to Driver seat belt is unbuckled at low speeds result in a 1 mph speed adjustment.
Page 115 STARTING AND OPERATING When ACC Is Active the vehicle speed automatically to maintain the distance setting, regardless of the set speed. When you use the SET (-) button to decelerate, if  The vehicle will then maintain the set distance until: the engine’s braking power does not slow the vehicle sufficiently to reach the set speed, the The vehicle ahead accelerates to a speed above...
Page 116 STARTING AND OPERATING Overtake Aid NOTE: WARNING! If the “ACC/FCW Unavailable Wipe Front Radar When driving with Adaptive Cruise Control (ACC) Sensor” warning is active, Fixed Speed Cruise When the ACC system is resumed, the driver engaged and following a vehicle, the system will Control is still available.
Page 117 STARTING AND OPERATING NOTE: If weather conditions are not a factor, the driver late or unexpectedly. The driver needs to stay alert should examine the windshield and the camera and may need to intervene. The following are If the “ACC/FCW Unavailable Wipe Front Radar ...
Page 118 STARTING AND OPERATING TURNS AND BENDS LANE CHANGING NARROW VEHICLES When driving on a curve with ACC engaged, the ACC may not detect a vehicle until it is completely Some narrow vehicles traveling near the outer system may increase or decrease the vehicle in the lane in which you are traveling.
Page 119: Parksense Front/Rear Park Assist
STARTING AND OPERATING PARKSENSE FRONT/REAR PARK ASSIST STATIONARY OBJECTS AND VEHICLES The automatic braking function may only be  applied if the vehicle deceleration is not enough ACC does not react to stationary objects or SYSTEM — IF EQUIPPED to avoid colliding with a detected obstacle. vehicles.
Page 120: Parksense Sensors
STARTING AND OPERATING For limitations of this system, precautions, and ENSE ENSORS ENSE ISPLAY recommendations, see Ú page 122. The six ParkSense sensors (four when vehicle is The warning display will turn on indicating the ParkSense will retain the last system state not equipped with front sensors), located in the system status when the vehicle is in REVERSE or (enabled or disabled) from the last ignition cycle...
Page 121 STARTING AND OPERATING Front/Rear/Side ParkSense Arcs 1 — No Tone/Solid Arc 7 — Fast Tone/Flashing Arc 2 — No Tone/Flashing Arc 8 — Slow Tone/Solid Arc 3 — Fast Tone/Flashing Arc 9 — Slow Tone/Solid Arc 4 — Continuous Tone/Flashing Arc 10 —...
Page 122 STARTING AND OPERATING The vehicle is close to the obstacle when the instrument cluster display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: WARNING ALERTS FOR REAR Greater than Less than Rear Distance...
Page 123: Parksense Warning Display
STARTING AND OPERATING Front Park Assist Audible Alerts When the ParkSense switch is pushed to disable five seconds. When the gear selector is moved to the system, the instrument cluster will display the REVERSE and the system has detected a faulted ParkSense will turn off the Front Park Assist “PARKSENSE OFF”...
Page 124: Cleaning The Parksense System
STARTING AND OPERATING If the "PARKSENSE UNAVAILABLE SERVICE ParkSense, when on, will reduce the volume of  WARNING! REQUIRED" message appears in the instrument the radio when it is sounding a tone. cluster display, see an authorized dealer. Drivers must be careful when backing up even ...
Page 125: Side Distance Warning System
STARTING AND OPERATING Message on the display for Side Distance Warning WARNING ALERTS CAUTION! feature: Less than ParkSense is only a parking aid and it is  “Wipe Sensors” — This message is displayed in the Distance 12–24 inches 12 inches unable to recognize every obstacle, including case of a failure of the Side Distance Warning (inches/cm)
Page 126: Parksense Active Park Assist System - If Equipped
STARTING AND OPERATING When you turn ParkSense off, the instrument  WARNING! CAUTION! cluster display will read “PARKSENSE OFF.” Furthermore, once you turn ParkSense off, it Drivers must be careful when backing up even ParkSense is only a parking aid and it is ...
Page 127: Enabling And Disabling The Parksense
STARTING AND OPERATING vehicle into a parallel or a perpendicular parking dynamic vehicle calibration to account for differ- Steering wheel is touched during active steering  space on either side (i.e., driver side or passenger ences such as over or under inflated tires and guidance into the parking space side), as well as exiting a parallel parking space.
Page 128: Parallel/Perpendicular Parking Space Assistance Operation
STARTING AND OPERATING Vehicle speed is less than 15 mph (25 km/h). When searching for a parking space, the driver   should drive as parallel or perpendicular Vehicle is not in 4WD Low (if equipped).  (depending on the type of maneuver) to other The outer surface and the underside of the front ...
Page 129 STARTING AND OPERATING Once the vehicle is in position, you will be It is the driver's responsibility to use the brake  instructed to stop the vehicle’s movement and and stop the vehicle. The driver should check remove your hands from the steering wheel. When their surroundings and be prepared to stop the the vehicle comes to a standstill (your hands still vehicle either when instructed to, or when driver...
Page 130: Exiting The Parking Space
STARTING AND OPERATING XITING ARKING PACE WARNING! NOTE: Drivers must be careful when performing paral- The function does not work for exiting a perpen- lel or perpendicular parking maneuvers even dicular parking space, but only exiting parallel when using the ParkSense Active Park Assist parking spaces.
Page 131: Lanesense - If Equipped
STARTING AND OPERATING LANESENSE — IF EQUIPPED NOTE: Base Instrument Cluster Display — If Equipped When operating conditions have been met, the When the LaneSense system is on, the lane lines LaneSense system will monitor if the driver’s ENSE PERATION are gray when both of the lane boundaries have hands are on the steering wheel and provide an not been detected and the LaneSense telltale...
Page 132 STARTING AND OPERATING When the LaneSense system senses the lane Left Lane Departure — Both Lanes Detected When the LaneSense system senses a lane drift   has been approached and is in a lane departure situation, the left lane line turns solid white. The When the LaneSense system is on, the lane ...
Page 133 STARTING AND OPERATING When the LaneSense system senses the lane Premium Instrument Cluster Display — If Equipped When the LaneSense system senses the lane   has been approached and is in a lane departure has been approached and is in a lane departure When the LaneSense system is on, the lane lines situation, the left lane line flashes from white to situation, the left lane line flashes from yellow to...
Page 134 STARTING AND OPERATING Left Lane Departure — Both Lanes Detected When the LaneSense system senses a lane drift When the LaneSense system senses the lane   situation, the left lane line turns solid yellow. has been approached and is in a lane departure When the LaneSense system is on, the lane ...
Page 135: Changing Lanesense Status
STARTING AND OPERATING NOTE: NOTE: HANGING ENSE TATUS The ParkView Rear Back Up Camera has program- If the vehicle speed remains below 8 mph  The LaneSense system has settings to adjust the mable modes of operation that may be selected (13 km/h), the Rear View Camera image will be intensity of the torque warning and the warning through the Uconnect system Ú...
Page 136: Refueling The Vehicle
STARTING AND OPERATING REFUELING THE VEHICLE WARNING! There is no fuel filler cap. Two flapper doors inside Drivers must be careful when backing up even the pipe seal the system. when using the ParkView Rear Back Up Camera. Always check carefully behind your vehicle, and 1.
Page 137: Vehicle Loading
STARTING AND OPERATING Gross Vehicle Weight Rating (GVWR) Tire Size WARNING! The GVWR is the total permissible weight of your The tire size on the Vehicle Certification Label A fire may result if fuel is pumped into a  vehicle including driver, passengers, vehicle, represents the actual tire size on your vehicle.
Page 138: Trailer Towing
STARTING AND OPERATING Loading Gross Vehicle Weight Rating (GVWR) CAUTION! The actual total weight and the weight of the front The GVWR is the total allowable weight of your Do not load your vehicle any heavier than the and rear of your vehicle at the ground can best be vehicle.
Page 139 STARTING AND OPERATING Gross Combination Weight Rating (GCWR) Trailer Frontal Area Weight-Distributing Hitch The GCWR is the total allowable weight of your The frontal area is the maximum height multiplied A weight-distributing hitch system works by vehicle and trailer when weighed in combination. by the maximum width of the front of a trailer.
Page 140: Trailer Hitch Classification
STARTING AND OPERATING RAILER ITCH LASSIFICATION The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow, and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Trailer Hitch Classification Definitions Class Max.
Page 141: Trailer And Tongue Weight
STARTING AND OPERATING The weight of any other type of cargo or equip- RAILER ONGUE EIGHT  WARNING! ment put in or on your vehicle. Never exceed the maximum tongue weight When hauling cargo, or towing a trailer, do not ...
Page 142 STARTING AND OPERATING Towing Requirements — Trailer Brakes CAUTION! CAUTION! Do not interconnect the hydraulic brake system  Do not tow a trailer at all during the first If the trailer weighs more than 1,000 lb (453 kg)  or vacuum system of your vehicle with that of 500 miles (805 km) the new vehicle is driven.
Page 143: Towing Tips
STARTING AND OPERATING NOTE: frequent shifting does occur while in DRIVE, use the AutoStick shift control to select a lower gear. Disconnect trailer wiring connector from the  vehicle before launching a boat (or any other NOTE: device plugged into vehicle’s electrical connect) Using a lower gear while operating the vehicle into water.
Page 144: Recreational Towing (Behind Motorhome)
STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME) OWING EHICLE EHIND NOTHER EHICLE 4X4 Models Front-Wheel Drive 1-Speed Power Towing Condition Wheels OFF the Ground 2-Speed Power Transfer Unit (FWD) Models Transfer Unit See Instructions: Transmission in PARK  Flat Tow NONE NOT ALLOWED NOT ALLOWED...
Page 145: Recreational Towing - Front-Wheel Drive (Fwd) Models
STARTING AND OPERATING — — 4 ECREATIONAL OWING ECREATIONAL OWING CAUTION! (FWD) M RONT HEEL RIVE ODELS ODELS PEED OWER Towing with the front wheels on the ground  will cause severe transmission damage. RANSFER DO NOT flat tow this vehicle. Damage to the Damage from improper towing is not covered drivetrain will result.
Page 146 STARTING AND OPERATING Use the following procedure to shift the 4WD CAUTION! system into N (NEUTRAL). Towing this vehicle in violation of the above  CAUTION! requirements can cause severe transmission and/or power transfer unit damage. Damage It is necessary to follow these steps to be certain from improper towing is not covered under the that the power transfer unit is fully in N New Vehicle Limited Warranty.
Page 147 STARTING AND OPERATING 16. Turn the ignition to the ON/RUN position, but Shifting Out Of N (NEUTRAL) 7. When the N (NEUTRAL) indicator light turns off, release the NEUTRAL (N) button. do not start the engine. Use the following procedure to prepare your 8.
Page 148: Driving Tips
STARTING AND OPERATING NOTE: Driving Through Water An advantage of the higher ground clearance is a better view of the road, allowing you to anticipate Steps 1 through 5 are requirements that must  Although your vehicle is capable of driving through problems.
Page 149 STARTING AND OPERATING Flowing Water Driving In Snow, Mud And Sand If you stall or begin to lose headway while climbing a steep hill, allow your vehicle to come to a stop If the water is swift flowing and rising (as in storm In heavy snow, when pulling a load, or for and immediately apply the brakes.
Page 150 STARTING AND OPERATING Traction Downhill After Driving Off-Road After extended operation in mud, sand, water, or  similar dirty conditions, have the radiator, fan, Shift the transmission into a low gear and the 4WD Off-road operation puts more stress on your brake rotors, wheels, brake linings, and axle system to 4WD LOW range or Select Hill Descent vehicle than does most on-road driving.
Page 151: Multimedia
MULTIMEDIA UCONNECT SYSTEMS and performance of your systems or to reduce the NOTE: potential risk of unauthorized and unlawful access FCA US LLC or your dealer may contact you  For detailed information about your Uconnect to your vehicle systems. directly regarding software updates.
Page 152: Uconnect Settings
MULTIMEDIA UCONNECT SETTINGS For the Uconnect 4/4C/4C NAV With 8.4-inch USTOMER ROGRAMMABLE EATURES Display The Uconnect system uses a combination of Press the Apps button, then press the Settings buttons on the touchscreen and buttons on the button on the touchscreen to display the menu faceplate located on the center of the instrument setting screen.
Page 153 MULTIMEDIA Language When the Language button is pressed on the touchscreen, the system displays the different language options. Once an option is selected, the system will display in the chosen language. The available setting is: NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description This setting will change the language of the Uconnect system and the...
Page 154 MULTIMEDIA Setting Name Description This setting will allow you to set the brightness when the headlights are off. To Display Brightness With Headlights OFF access this setting, Display Mode must be set to Manual. The “+” setting will increase the brightness; the “-” will decrease the brightness. Set Theme This setting will allow you to change the display theme.
Page 155 MULTIMEDIA Units When the Units button is pressed on the touchscreen, the system displays the different measurement options. The selected unit of measurement will display in the instrument cluster display and Navigation system (if equipped). The available settings are: NOTE: Depending on the vehicle’s options, feature settings may vary.
Page 156 MULTIMEDIA Clock When the Clock button is pressed on the touchscreen, the system displays the different options related to the vehicle’s internal clock. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description This setting will sync the time to the GPS receiver in the system. The system Sync Time With GPS will control the time via the GPS location.
Page 157 MULTIMEDIA Camera When the Camera button is pressed on the touchscreen, the system displays the options related to the vehicle’s camera features. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description This setting will add a delay to the ParkView Backup Camera when shifting out ParkView Backup Camera Delay of REVERSE.
Page 158 MULTIMEDIA Setting Name Description This setting will turn the Forward Collision system on or off. The “Off” setting will deactivate the FCW system. The “Warning Only” setting will provide only Forward Collision Warning an audible chime when a collision is detected. The “Warning + Active Braking” setting will provide an audible chime and apply brake pressure when a collision is detected.
Page 159 MULTIMEDIA Setting Name Description This setting will add a delay to the ParkView Backup Camera when shifting out ParkView Backup Camera Delay of REVERSE. This setting will turn the Side Distance Warning on or off and set how the system will communicate with the user. The “Off” setting will deactivate the Side Distance Warning system.
Page 160 MULTIMEDIA Mirrors & Wipers When the Mirrors & Wipers button is pressed on the touchscreen, the system displays the options related to the vehicle’s mirrors and wipers. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description This setting will tilt the outside side-view mirrors when the ignition is in the ON/RUN position and the transmission gear selector is in the REVERSE Tilt Side Mirrors in Reverse...
Page 161 MULTIMEDIA Lights When the Lights button is pressed on the touchscreen, the system displays the options related to the vehicle’s exterior and interior lights. NOTE: When the “Daytime Running Lights” feature is selected, the daytime running lights can be turned On or Off. This feature is only allowed by law in the country ...
Page 162 MULTIMEDIA Doors & Locks When the Doors & Locks button is pressed on the touchscreen, the system displays the options related to locking and unlocking the vehicle’s doors. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description This setting will unlock the doors when any of the doors are opened from the Auto Unlock On Exit...
Page 163 MULTIMEDIA Setting Name Description This setting will chime an audible alert when the power liftgate is raising or Power Liftgate Alert lowering. Selectable options are “On” and “Off”. This setting will use hands-free technology to automatically open or close the Hands Free Power Liftgate power liftgate.
Page 164 MULTIMEDIA Key Off Options/Engine Off Options When the Key Off Options/Engine Off Options button is pressed on the touchscreen, the system displays the options related to vehicle shut off. These settings will only activate when the ignition is set to OFF. NOTE: Depending on the vehicle’s options, feature settings may vary.
Page 165 MULTIMEDIA Setting Name Description This setting will adjust audio volume as speeds increase. At a higher setting, Speed Adjusted Volume the volume will increase more as the vehicle speeds up. The available settings are “Off”, “1”, “2”, and “3”. Surround Sound This setting will turn the Surround Sound system on or off.
Page 166 MULTIMEDIA SiriusXM® Setup — If Equipped When the SiriusXM® Setup button is pressed on the touchscreen, the system displays options related to SiriusXM® satellite radio. These settings can be used to skip specific radio channels and restart favorite songs from the beginning. NOTE: A subscription to SiriusXM®...
Page 167 MULTIMEDIA Clear Personal Data/Restore Settings When the Clear Personal Data/Restore Settings button is pressed on the touchscreen, the system displays the options related to resetting the Uconnect system back to its default settings. These settings can clear personal data and reset selected settings from other menus. NOTE: Depending on the vehicle’s options, feature settings may vary.
Page 168: Radio Operation And Mobile Phones
MULTIMEDIA RADIO OPERATION AND MOBILE PHONES The internal wireless radio operates within guidelines found in radio frequency safety Under certain conditions, the mobile phone being standards and recommendations, which reflect on in your vehicle can cause erratic or noisy the consensus of the scientific community. performance from your radio.
Page 169: Off-Road Pages Status Bar
MULTIMEDIA & R AGES TATUS ITCH The Off-Road Pages Status Bar is located along the The Pitch & Roll page displays the vehicle’s current bottom of Off-Road Pages and is present in each of pitch (angle up and down) and roll (angle side to the five selectable page options.
Page 170: Accessory Gauges
MULTIMEDIA — I NOTE: CCESSORY AUGES ELEC ERRAIN QUIPPED While in the Selec-Terrain pages, the Off-Road The Accessory Gauges page displays the current The Selec-Terrain page displays the current Pages Status Bar will also display the current status of the vehicle’s Coolant Temperature, Oil Selec-Terrain mode through a high resolution Selec-Terrain mode.
Page 171: Safety
SAFETY SAFETY FEATURES The ABS is designed to function with the Original WARNING! Equipment Manufacturer (OEM) tires. Modification (ABS) may result in degraded ABS performance. The ABS cannot prevent collisions, including RAKE YSTEM  those resulting from excessive speed in turns, The ABS provides increased vehicle stability and WARNING! following another vehicle too closely, or hydro-...
Page 172: Electronic Brake Control (Ebc) System
SAFETY If the ABS Warning Light is on, the brake system pressure to the brakes. This can help reduce If the Brake System Warning Light remains on or should be serviced as soon as possible to restore braking distances. The BAS complements the comes on while driving, it indicates that the brake the benefits of Anti-Lock Brakes.
Page 173 SAFETY Electronic Brake Force Distribution (EBD) ESC uses sensors in the vehicle to determine the WARNING! vehicle path intended by the driver and compares EBD function manages the distribution of the it to the actual path of the vehicle. When the actual Many factors, such as vehicle loading, road braking torque between the front and rear axles by path does not match the intended path, ESC...
Page 174 SAFETY Partial Off WARNING! WARNING! This mode may be useful if the vehicle becomes Electronic Stability Control (ESC) cannot Vehicle modifications, or failure to properly   stuck. This mode may modify TCS and ESC prevent the natural laws of physics from maintain your vehicle, may change the thresholds for activation, which allows for more acting on the vehicle, nor can it increase the...
Page 175 SAFETY Full Off — If Equipped The ESC Activation/Malfunction Indicator Light WARNING! starts to flash as soon as the tires lose traction and This mode is intended for off-highway or off-road the ESC system becomes active. The ESC The Electronic Stability Control (ESC) cannot ...
Page 176 SAFETY Hill Descent Control (HDC) — If Equipped NOTE: Activating HDC During HDC the +/- shifter input is used for HDC Once HDC is enabled it will activate automatically HDC is intended for low speed off-road driving target speed selection, but will not affect the gear if driven down a grade of sufficient magnitude.
Page 177 SAFETY Disabling HDC The cluster icon and button lamp will flash for The parking brake must be off.   several seconds then extinguish when HDC HDC will be deactivated and disabled if any of the The driver door must be closed. ...
Page 178 SAFETY Disabling And Enabling HSA Rain Brake Support (RBS) Enabling SSC SSC is enabled by pushing the SSC button, but the This feature can be turned on or turned off. To RBS may improve braking performance in wet following conditions must also be met to enable change the current setting, proceed as follows: conditions.
Page 179 SAFETY 3rd = 1.8 mph (3 km/h) Deactivating SSC Feedback To The Driver:  4th = 2.5 mph (4 km/h) SSC will be deactivated but remain available if any The instrument cluster has an SSC icon and the  of the following conditions occur: SSC button has an LED which offers feedback to 5th = 3.1 mph (5 km/h) ...
Page 180: Auxiliary Driving Systems
SAFETY Traction Control System (TCS) When TSC is functioning, the ESC Activation/ Malfunction Indicator Light will flash, the engine The TCS monitors the amount of wheel spin of power may be reduced and you may feel the each of the driven wheels. If wheel spin is brakes being applied to individual wheels to detected, the TCS may apply brake pressure to the attempt to stop the trailer from swaying.
Page 181 SAFETY NOTE: The BSM system DOES NOT alert the driver  about rapidly approaching vehicles that are outside the detection zones. The BSM system detection zone DOES NOT  change if your vehicle is towing a trailer. There- fore, visually verify the adjacent lane is clear for both your vehicle and trailer before making a lane change.
Page 182 SAFETY Entering From The Side Vehicles that move into your adjacent lanes from either side of the vehicle. Rear Monitoring Overtaking/Approaching Overtaking Traffic If you pass another vehicle slowly with a relative speed less than 15 mph (24 km/h) and the vehicle Side Monitoring remains in the blind spot for approximately 1.5 Entering From The Rear...
Page 183 SAFETY The BSM system will not alert you of objects that Rear Cross Path (RCP) When RCP is on and the vehicle is in REVERSE (R), the driver is alerted using both the visual and are traveling in the opposite direction of the vehicle RCP is intended to aid the driver when backing out in adjacent lanes Ú...
Page 184: Forward Collision Warning (Fcw) With Mitigation - If Equipped
SAFETY Blind Spot Modes NOTE: NOTE: Whenever an audible alert is requested by the FCW monitors the information from the forward Blind Spot has three selectable modes of BSM system, the radio is also muted. looking sensors as well as the Electronic Brake operation that are available in the Uconnect Controller (EBC), to calculate the probability of a When the system is in RCP, the system shall...
Page 185 SAFETY The FCW system is intended for on-road use NOTE:  only. If the vehicle is taken off-road, the FCW When the FCW is “on”, this allows the system to  system should be deactivated to prevent unnec- warn the driver of a possible collision with the essary warnings to the surroundings.
Page 186: Tire Pressure Monitoring System (Tpms)
SAFETY FCW Braking Status And Sensitivity This setting provides less reaction time than  RESSURE ONITORING YSTEM the “Far” and “Medium” settings, which (TPMS) The FCW Sensitivity and Active Braking status are allows for a more dynamic driving experi- programmable through the Uconnect system ence.
Page 187 SAFETY The TPMS will continue to warn the driver of low NOTE: CAUTION! tire pressure as long as the condition exists, and When filling warm tires, the tire pressure may need will not turn off until the tire pressure is at or above to be increased up to an additional 4 psi (28 kPa) After inspecting or adjusting the tire pressure ...
Page 188 SAFETY Premium System Vehicles With Compact Spare Or Non-Matching Full Size Spare The Tire Pressure Monitoring System (TPMS) uses 1. The compact spare tire or non-matching full wireless technology with wheel rim mounted size does not have a TPMS sensor. Therefore, electronic sensors to monitor tire pressure levels.
Page 189 SAFETY 5. Once you repair or replace the original road tire TIRE FILL ALERT and reinstall it on the vehicle in place of the Tire Fill Alert notifies the user when the placard tire compact spare or non-matching full size, the pressure is attained while inflating or deflating the TPMS will update automatically.
Page 190: Occupant Restraint Systems
SAFETY Operation: vehicle for 20 minutes above 15 mph (24 km/h). CCUPANT ESTRAINT YSTEMS The TPMS will chime, the TPMS Warning Light will The horn will chirp once to let the user know  EATURES flash on and off for 75 seconds and then remain when to stop filling the tire, when it reaches on.
Page 191: Seat Belt Systems
SAFETY 3. If a child from 2 to 12 years old (not in a Enhanced Seat Belt Use Reminder System WARNING! rear-facing child restraint) must ride in the (BeltAlert) front passenger seat, move the seat as far Never place a rear-facing child restraint in ...
Page 192 SAFETY NOTE: outboard front passenger seat is unoccupied). The WARNING! BeltAlert warning sequence starts by blinking the If BeltAlert has been deactivated and the driver or Seat Belt Reminder Light and sounding an outboard front seat passenger (if equipped with In a collision, you and your passengers can ...
Page 193 SAFETY WARNING! WARNING! WARNING! Wearing your seat belt incorrectly could make A twisted seat belt may not protect you prop- A shoulder belt placed behind you will not    your injuries in a collision much worse. You erly. In a collision, it could even cut into you. protect you from injury during a collision.
Page 194 SAFETY Lap/Shoulder Belt Operating Instructions 5. Position the shoulder belt across the shoulder and chest with minimal, if any slack so that it 1. Enter the vehicle and close the door. Sit back is comfortable and not resting on your neck. and adjust the seat.
Page 195 SAFETY Adjustable Upper Shoulder Belt Anchorage NOTE: Second Row Center Seat Belt Operating The adjustable upper shoulder belt anchorage is Instructions — Fixed Rear Seat In the driver and outboard front passenger seats, equipped with an Easy Up feature. This feature (If Equipped) the top of the shoulder belt can be adjusted allows the shoulder belt anchorage to be adjusted...
Page 196 SAFETY 2. Grab the mini-latch plate and pull the seat belt 4. When the seat belt is long enough to fit, insert 7. Position the lap belt so that it is snug and lies over the seat. the mini-latch plate into the mini-buckle until low across your hips, below your abdomen.
Page 197 SAFETY 10. To disengage the mini-latch plate from the WARNING! WARNING! mini-buckle for storage, insert the regular latch plate into the center red slot on the ONLY use a Seat Belt Extender if it is physically When reattaching the mini-latch plate and ...
Page 198 SAFETY Energy Management Feature Seat belts must be worn by all occupants including pregnant women: the risk of injury in the event of The front outboard seat belt system is equipped an accident is reduced for the mother and the with an Energy Management feature that may help unborn child if they are wearing a seat belt.
Page 199: Supplemental Restraint Systems (Srs)
SAFETY a seat belt with this feature. Children 12 years old Automatic Locking Mode and activate the vehicle electrical Air Bag System Components. Your sensitive (emergency) locking mode. and under should always be properly restrained in vehicle may be equipped with the following Air Bag the rear seat of a vehicle with a rear seat.
Page 200 SAFETY Redundant Air Bag Warning Light The ORC contains a backup power supply system The Air Bag Warning Light does not come on  that may deploy the air bag system even if the during the four to eight seconds when the igni- If a fault with the Air Bag Warning Light is battery loses power or it becomes disconnected tion switch is first in the ON/RUN position.
Page 201 SAFETY This vehicle may be equipped with a driver and/or WARNING! front passenger seat belt buckle switch that detects whether the driver or front passenger seat belt is Never place a rear-facing child restraint in  buckled. The seat belt buckle switch may adjust the front of an air bag.
Page 202 SAFETY When the Occupant Restraint Controller (ORC) Occupant Classification Module (OCM) And Sensor WARNING! detects a collision requiring the front air bags, it The Occupant Classification Module (OCM) is signals the inflator units. A large quantity of Relying on the air bags alone could lead to ...
Page 203 SAFETY Front Passenger Seat Occupant Status Front Passenger Air Bag Output Rear-facing child restraint Reduced-power deployment Child, including a child in a forward-facing child restraint or booster seat* Reduced-power deployment OR Full-power deployment Properly seated adult Full-power deployment OR reduced-power deployment Unoccupied seat Reduced-power deployment * It is possible for a child to be classified as an adult, allowing a full-power Passenger Advanced Front Air Bag deployment.
Page 204 SAFETY Examples of improper front passenger seating Lighter Weight Passengers (Including Small Adults) include: When a lighter weight passenger, including a small adult, occupies the front passenger seat, the OCS The front passenger’s weight is transferred to  may reduce the inflation rate of the Passenger another part of the vehicle (like the door, arm Advanced Front Air Bag.
Page 205 SAFETY The Air Bag Warning Light in the instrument WARNING! panel will turn on whenever the OCS is unable to classify the front passenger seat status. A If a child restraint system, child, small teen-  malfunction in the OCS may affect the operation of ager or adult in the front passenger seat is the air bag system.
Page 206 SAFETY Knee Impact Bolsters Supplemental Side Air Bags Do not replace the seat cover or cushion with an  aftermarket seat cover or cushion. The Knee Impact Bolsters help protect the knees Supplemental Seat-Mounted Side Air Bags (SABs) Do not add a secondary seat cover or mat. of the driver and front passenger, and position the ...
Page 207 SAFETY When the SAB deploys, it opens the seam on the WARNING! outboard side of the seatback’s trim cover. The inflating SAB deploys through the seat seam into Do not mount equipment, or stack luggage or  the space between the occupant and the door. The other cargo up high enough to block the SAB moves at a very high speed and with such a deployment of the SABICs.
Page 208 SAFETY NOTE: deploys the left Side Air Bags only and a right-side WARNING! impact deploys the right Side Air Bags only. Vehicle Air bag covers may not be obvious in the interior damage by itself is not a good indicator of whether trim, but they will open during air bag deployment.
Page 209 SAFETY Air Bag System Components If A Deployment Occurs irritation, move to fresh air. If the irritation continues, see your doctor. If these particles The front air bags are designed to deflate NOTE: settle on your clothing, follow the garment immediately after deployment.
Page 210 SAFETY Enhanced Accident Response System Electric park brake After an accident, if the vehicle will not start after  performing the reset procedure, the vehicle must Automatic transmission gear selector In the event of an impact, if the communication  be towed to an authorized dealer to be inspected network remains intact, and the power remains Horn...
Page 211: Child Restraints
SAFETY Whether or not the driver and passenger safety province, requires that small children ride in  WARNING! belts were buckled/fastened; proper restraint systems. This is the law, and you can be prosecuted for ignoring it. Do not attempt to modify any part of your air ...
Page 212 SAFETY Before buying any restraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. You should also make sure that you can install it in the vehicle where you will use it. NOTE: For additional information, refer to http://www.nhtsa.gov/parents-and-caregivers or call: 1–888–327–4236 Canadian residents should refer to Transport Canada’s website for additional information: http://www.tc.gc.ca/en/services/road/child-car-seat-safety.html Summary Of Recommendations For Restraining Children In Vehicles...
Page 213 SAFETY Infant And Child Restraints WARNING! WARNING! Safety experts recommend that children ride Improper installation can lead to failure of an Never install a rear-facing child restraint in the   rear-facing in the vehicle until they are two years front seat of a vehicle.
Page 214 SAFETY Children Too Large For Booster Seats the shoulder belt contacts the face or neck, move 3. Does the shoulder belt cross the child’s shoulder between the neck and arm? the child closer to the center of the vehicle, or use Children who are large enough to wear the a booster seat to position the seat belt on the child 4.
Page 215 SAFETY Lower Anchors And Tethers For CHildren LATCH Positions For Installing Child (LATCH) Restraint System Restraints In This Vehicle Fixed Second Row LATCH Positions LATCH Label Lower Anchorage Symbol (2 Anchorages Per Seating Position) Your vehicle is equipped with the child restraint Sliding Second Row LATCH Positions Top Tether Anchorage Symbol anchorage system called LATCH, which stands for...
Page 216 SAFETY Frequently Asked Questions About Installing Child Restraints With LATCH Use the LATCH anchorage system until the combined weight What is the weight limit (child’s weight + weight of the child of the child and the child restraint is 65 lbs (29.5 kg). Use the restraint) for using the LATCH anchorage system to attach the 65 lbs (29.5 kg) seat belt and tether anchor instead of the LATCH system once...
Page 217 SAFETY Locating The LATCH Anchorages easily feel them if you run your finger along the gap LATCH-compatible child restraint systems will be between the seatback and seat cushion. equipped with a rigid bar or a flexible strap on each Sliding 2nd Row Seat: side.
Page 218 SAFETY outboard seating position (3) for any occupant. Fixed 2nd Row Seat: The center child restraint will block the seat Do not install child restraints with rigid lower belt buckle for this position. attachments in the center seating position. Only install this type of child restraint in the outboard seating positions.
Page 219 SAFETY Always follow the directions of the child restraint 3. Attach the lower hooks or connectors of the through the child restraint belt path and then child restraint to the lower anchorages in the manufacturer when installing your child restraint. buckle it.
Page 220 SAFETY Installing Child Restraints Using The Please see the table below and the following sections for more information. Vehicle Seat Belt Lap/Shoulder Belt Systems For Installing Child restraint systems are designed to be secured Child Restraints In This Vehicle in vehicle seats by lap belts or the lap belt portion of a lap/shoulder belt.
Page 221 SAFETY Frequently Asked Questions About Installing Child Restraints With Seat Belts What is the weight limit (child’s weight + weight of the child Always use the tether anchor when using the seat belt to restraint) for using the Tether Anchor with the seat belt to Weight limit of the Child Restraint install a forward facing child restraint, up to the attach a forward facing child restraint?
Page 222 SAFETY Installing Child Restraints Using The Top 5. To lock the seat belt, pull down on the shoulder for that seating position, move the child part of the belt until you have pulled all the restraint to another position in the vehicle if Tether Anchorage seat belt webbing out of the retractor.
Page 223: Safety Tips
SAFETY If your vehicle is involved in a collision, or if you WARNING! WARNING! have questions regarding seat belt or retractor conditions, take your vehicle to an authorized FCA An incorrectly anchored tether strap could Do not allow people to ride in any area of your ...
Page 224: Periodic Safety Checks You Should Make Outside The Vehicle
SAFETY Floor Mat Safety Information WARNING! WARNING! Always use floor mats designed to fit your vehicle. ONLY install floor mats designed to fit your NEVER place any objects under the floor mat   Only use a floor mat that does not interfere with the vehicle.
Page 225: Exhaust Gas
SAFETY lug nut/bolt torque for tightness. Check the tires ARBON ONOXIDE ARNINGS WARNING! (including spare) for proper cold inflation pressure. If you are required to drive with the trunk/lift- Lights  WARNING! gate/rear doors open, make sure that all Have someone observe the operation of brake Carbon monoxide (CO) in exhaust gases is windows are closed and the climate control lights and exterior lights while you work the...
Page 226: In Case Of Emergency
IN CASE OF EMERGENCY HAZARD WARNING FLASHERS When you must leave the vehicle to seek If equipped, the Rearview Mirror contains a SOS assistance, the Hazard Warning Flashers will and a ASSIST button. The Hazard Warning Flashers button is located in continue to operate even though the ignition is the lower center area of the instrument panel.
Page 227 IN CASE OF EMERGENCY SOS Call 4. You should be able to speak with the SOS ring in the vehicle. The vehicle’s SOS Call operator through the vehicle audio system to system will attempt to remain connected 1. Push the SOS Call button on the Rearview determine if additional help is needed.
Page 228 IN CASE OF EMERGENCY If the SOS Call system detects a malfunction, any Even if the SOS Call system is fully functional, WARNING! of the following may occur at the time the factors beyond FCA US LLC’s control may prevent malfunction is detected, and at the beginning of or stop the SOS Call system operation.
Page 229: Jacking And Tire Changing
IN CASE OF EMERGENCY Vehicle Customer Care – Total support for all  WARNING! CAUTION! other vehicle issues. ALWAYS obey traffic laws and pay attention to To avoid damage to the mirror during cleaning, Uconnect Customer Care - Total support for ...
Page 230: Preparations For Jacking
IN CASE OF EMERGENCY REPARATIONS ACKING 1. Park the vehicle on a firm level surface as far from the edge of the roadway as possible. Avoid icy or slippery areas. WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic.
Page 231: Jacking Instructions
IN CASE OF EMERGENCY 5. Remove the chocks. WARNING! WARNING! 6. Remove the scissors jack and wheel bolt A loose tire or jack thrown forward in a collision Do not let anyone sit in the vehicle when it is  wrench from the spare wheel as an assembly.
Page 232 IN CASE OF EMERGENCY 1. Remove the spare tire, jack, wheel chocks, 4. Place the jack underneath the lift area that is and wheel bolt wrench. closest to the flat tire. Turn the jack screw clockwise to firmly engage the jack saddle with 2.
Page 233 IN CASE OF EMERGENCY NOTE: For vehicles equipped, do not attempt to install a center cap or wheel cover on the compact spare Ú page 290. 9. Install the wheel bolts with the threaded end of the wheel bolt toward the wheel. Lightly tighten the wheel bolts.
Page 234: Tire Service Kit - If Equipped
IN CASE OF EMERGENCY 10. Lower the vehicle to the ground by turning the ERVICE TORAGE WARNING! jack handle counterclockwise. The Tire Service Kit is stowed under the load floor A loose tire or jack thrown forward in a collision 11.
Page 235: Tire Service Kit Components And Operation
IN CASE OF EMERGENCY Using The Mode Select Knob And Hoses ERVICE OMPONENTS ERVICE SAGE RECAUTIONS Your Tire Service Kit is equipped with the following PERATION Replace the Tire Service Kit Sealant Bottle and  symbols to indicate the air or sealant mode. Sealant Hose prior to the expiration date NOTE: Selecting Air Mode...
Page 236 IN CASE OF EMERGENCY components. Once the sealant dries, it can WARNING! WARNING! easily be peeled off and properly discarded. Do not use Tire Service Kit or drive the vehicle Take care not to allow the contents of Tire For optimum performance, make sure the valve ...
Page 237: Sealing A Tire With Tire Service Kit
IN CASE OF EMERGENCY 3. Place the Tire Service Kit flat on the ground If the sealant (white fluid) does not flow within EALING ERVICE next to the deflated tire. 0 – 10 seconds through the Sealant Hose: (A) Whenever You Stop To Use Tire Service 4.
Page 238 IN CASE OF EMERGENCY (D) Drive Vehicle: If the sealant (white fluid) does flow through the If the tire inflates to the recommended pressure or Sealant Hose: is at least 26 psi (1.8 Bar) pressure within Immediately after injecting sealant and inflating 15 minutes: 1.
Page 239: Jump Starting
IN CASE OF EMERGENCY JUMP STARTING If tire pressure is less than 19 psi (1.3 Bar): NOTE: When having the tire serviced, advise the autho- The tire is too badly damaged. Do not attempt to If your vehicle has a discharged battery, it can be rized dealer or service center that the tire has been drive the vehicle further.
Page 240: Preparations For Jump Start
IN CASE OF EMERGENCY REPARATIONS TART TARTING ROCEDURE The battery in your vehicle is located in the front of WARNING! WARNING! the engine compartment, behind the left headlight Do not allow vehicles to touch each other as this assembly. Failure to follow this jump starting procedure could establish a ground connection and could result in personal injury or property personal injury could result.
Page 241: Refueling In Emergency - If Equipped
IN CASE OF EMERGENCY 4. Connect the opposite end of the negative (-) CAUTION! CAUTION! jumper cable to a good engine ground. A “ground” is an exposed metallic/unpainted Do not run the booster vehicle engine above Accessories plugged into the vehicle power part of the engine, frame or chassis, such as 2,000 RPM since it provides no charging benefit, outlets draw power from the vehicle’s battery,...
Page 242: If Your Engine Overheats
IN CASE OF EMERGENCY NOTE: WARNING! In certain cold conditions, ice may prevent the fuel door from opening. If this occurs, lightly push on A fire may result if fuel is pumped into a  the fuel door to break the ice buildup and portable container that is inside of a vehicle.
Page 243: Gear Selector Override
IN CASE OF EMERGENCY GEAR SELECTOR OVERRIDE NOTE: 4. Press and maintain firm pressure on the brake There are steps that you can take to slow down an pedal. If a malfunction occurs and the gear selector impending overheat condition: 5.
Page 244: Freeing A Stuck Vehicle
IN CASE OF EMERGENCY FREEING A STUCK VEHICLE WARNING! CAUTION! If your vehicle becomes stuck in mud, sand or snow, Fast spinning tires can be dangerous. Forces Racing the engine or spinning the wheels may  it can often be moved using a rocking motion. Turn generated by excessive wheel speeds may cause lead to transmission overheating and failure.
Page 245: Towing A Disabled Vehicle
IN CASE OF EMERGENCY TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial towing service. If the transmission and drivetrain are operable, disabled 4x4 vehicles may also be towed Ú page 142. 4X4 MODELS Towing Condition Wheels OFF The Ground FWD MODELS...
Page 246: Front-Wheel Drive (Fwd) Models
IN CASE OF EMERGENCY (FWD) M NOTE: RONT HEEL RIVE ODELS CAUTION! The Safehold feature will engage the Electric Park The FCA US LLC recommends towing your vehicle Brake whenever the driver's door is opened (if the DO NOT tow this vehicle with ANY of its wheels ...
Page 247: Emergency Tow Hooks - If Equipped
IN CASE OF EMERGENCY — If flatbed equipment is not available and the Power MERGENCY OOKS Transfer Unit is operable, vehicles with a 2–speed QUIPPED Power Transfer Unit may be towed (in the forward direction, with ALL wheels on the ground), under If your vehicle is equipped with tow hooks, there the following conditions: will be two mounted in the front fascia/bumper...
Page 248: Recovery Strap - If Equipped
IN CASE OF EMERGENCY EVENT DATA RECORDER (EDR) — I Using Recovery Strap ECOVERY TRAP QUIPPED 1. Review all warnings and instructions first. Your vehicle may be included with a recovery strap. This vehicle is equipped with an event data 2.
Page 249: Servicing And Maintenance
SERVICING AND MAINTENANCE SCHEDULED SERVICING An authorized dealer will reset the oil change At Every Fuel Stop: indicator message after completing the scheduled Check engine oil level.  Your vehicle is equipped with an automatic oil oil change. If a scheduled oil change is performed Check windshield washer fluid level.
Page 250: Maintenance Plan
SERVICING AND MAINTENANCE AINTENANCE Refer to the following required maintenance intervals. At Every Oil Change Interval As Indicated By Oil Change Indicator System: Change oil and filter.  Rotate the tires at the first sign of irregular wear, even if it occurs before the oil indicator system turns on. ...
Page 251 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV/Universal joints. Inspect front suspension, boot seals. tie rod ends, and replace if necessary. Inspect the brake linings, parking brake function. Inspect front accessory drive belt, tensioner, idler pulley, and replace if necessary.
Page 252 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first. Inspect and replace PCV valve if necessary. 1. The spark plug change interval is mileage based only, yearly intervals do not apply. WARNING! You can be badly injured working on or around a motor vehicle.
Page 253: Engine Compartment
SERVICING AND MAINTENANCE ENGINE COMPARTMENT 2.0L E NGINE 1 — Engine Air Cleaner Filter 5 — Engine Oil Dipstick 2 — Oil Fill Cap 6 — Engine Coolant Reservoir 3 — Brake Fluid Reservoir Cap 7 — Battery 4 — Power Distribution Center (Fuses) 8 —...
Page 254: L Engine
SERVICING AND MAINTENANCE 2.4L E NGINE 1 — Engine Air Cleaner Filter 5 — Engine Oil Dipstick 2 — Oil Fill Cap 6 — Engine Coolant Reservoir 3 — Brake Fluid Reservoir Cap 7 — Battery 4 — Power Distribution Center (Fuses) 8 —...
Page 255: L Engine
SERVICING AND MAINTENANCE 3.2L E NGINE 1 — Engine Air Cleaner Filter 6 — Engine Oil Dipstick 2 — Oil Filter Access Cover 7 — Engine Coolant Reservoir 3 — Brake Fluid Reservoir Cap 8 — Battery 4 — Power Distribution Center (Fuses) 9 —...
Page 256: Checking Oil Level
SERVICING AND MAINTENANCE HECKING EVEL CAUTION! WARNING! To ensure proper engine lubrication, the engine oil Overfilling or underfilling the crankcase will Commercially available windshield washer must be maintained at the correct level. Check the cause aeration or loss of oil pressure. This could solvents are flammable.
Page 257: Pressure Washing
SERVICING AND MAINTENANCE NGINE CAUTION! WARNING! Engine Oil Selection Precautions have been taken to safeguard all Battery posts, terminals, and related accesso-  ries contain lead and lead compounds. Wash parts and connections however, the pressures Use only the manufacturer's recommended fluid generated by these machines is such that hands after handling.
Page 258: Engine Oil Filter
SERVICING AND MAINTENANCE Synthetic Engine Oils Engine Air Cleaner Filter Selection NGINE ILTER The quality of replacement filters varies Your engine was designed for synthetic engine oils, The engine oil filter should be replaced with a new considerably. Only high quality Mopar® certified only use synthetic API approved engine oils.
Page 259: Accessory Drive Belt Inspection
SERVICING AND MAINTENANCE 2. If equipped with a 2.0L, remove the screws 3. Install screws to secure the engine air cleaner from the engine air cleaner filter cover and filter cover to the housing assembly and disconnect the electrical sensor. reconnect the electrical connector (if equipped).
Page 260: Air Conditioner Maintenance
SERVICING AND MAINTENANCE Some conditions can be caused by a faulty WARNING! component such as a belt pulley. Belt pulleys should be carefully inspected for damage and The air conditioning system contains refrig-  proper alignment. erant under high pressure. To avoid risk of personal injury or damage to the system, Belt replacement on some models requires the adding refrigerant or any repair requiring lines...
Page 261 SERVICING AND MAINTENANCE Refrigerant Recovery And Recycling The cabin air filter is located in front of the evaporator on the lower right of center console. R-1234yf — If Equipped Perform the following procedure to replace the R-1234yf Air Conditioning Refrigerant is a Hydroflu- filter: oroolefin (HFO) that is endorsed by the 1.
Page 262: Body Lubrication
SERVICING AND MAINTENANCE 5. Remove the cabin air filter by pulling it straight Refer to the Maintenance Plan in this chapter for Operation of the wipers on dry glass for long out of the housing. Take note of the air filter the proper maintenance intervals Ú...
Page 263 SERVICING AND MAINTENANCE Front Wiper Blade Removal/Installation 2. To disengage the wiper blade from the wiper 3. With the wiper blade disengaged, remove the arm, flip up the release tab on the wiper blade wiper blade from the wiper arm by holding the CAUTION! and while holding the wiper arm with one wiper arm with one hand and separating the...
Page 264 SERVICING AND MAINTENANCE NOTE: Installing The Front Wipers The rear wiper arm cannot be fully raised off the 1. Lift the wiper arm off of the glass, until the glass unless the wiper arm pivot cap is unsnapped wiper arm is in the full up position. first.
Page 265: Exhaust System
SERVICING AND MAINTENANCE 4. Still grabbing the bottom end of the wiper NOTE: addition, have the exhaust system inspected each time the vehicle is raised for lubrication or oil blade, move the wiper blade upward and away The rear wiper arm cannot be fully raised off the from the wiper arm to disengage.
Page 266: Cooling System
SERVICING AND MAINTENANCE To minimize the possibility of catalytic converter CAUTION! WARNING! damage: Damage to the catalytic converter can result if When working near the radiator cooling fan,  Do not interrupt the ignition when the transmis-   your vehicle is not kept in proper operating disconnect the fan motor lead or turn the igni- sion is in gear and the vehicle is in motion.
Page 267 SERVICING AND MAINTENANCE Cooling System — Drain, Flush And Refill drained, flushed, and refilled with fresh OAT Please review these recommendations for using coolant (conforming to MS.90032), by an autho- OAT engine coolant that meets the requirements of Some vehicles require special tools to add coolant rized dealer as soon as possible.
Page 268 SERVICING AND MAINTENANCE damage. If any coolant is needed to be added to When additional engine coolant is needed to WARNING! the system, please contact a local authorized maintain the proper level, only OAT coolant that dealer. meets the requirements of the manufacturer Do not use a pressure cap other than the one ...
Page 269: Brake System
SERVICING AND MAINTENANCE Maintain engine coolant concentration at a  WARNING! WARNING! minimum of 50% OAT coolant (conforming to MS.90032) and distilled water for proper corro- Riding the brakes can lead to brake failure and Use only manufacturer's recommended brake ...
Page 270: Automatic Transmission
SERVICING AND MAINTENANCE Fluid Level Check Routine fluid and filter changes are not required. WARNING! However, change the fluid and filter if the fluid The fluid level is preset at the factory and does not becomes contaminated (with water, etc.), or if the Do not allow petroleum-based fluid to contam- ...
Page 271: Fuses
SERVICING AND MAINTENANCE USES 1 — Fuse Element CAUTION! 2 — Blade Fuse With A Good/Functional Fuse General Information If it is necessary to wash the engine Element compartment, take care not to directly hit the WARNING! 3 — Blade Fuse With A Bad / Not Functional Fuse fuse box, and the windshield wiper motors with Element (Blown Fuse) water.
Page 272 SERVICING AND MAINTENANCE Power Distribution Location Cavity Blade Fuse Cartridge Fuse Description * If Equipped – 70 Amp Gray Electric Power Str – 150 Amp Gray Aux PDC * – 300 Amp Gray Alternator...
Page 273 SERVICING AND MAINTENANCE Cavity Blade Fuse Cartridge Fuse Description * If Equipped – – Battery – 100 Amp Gray Rad Fan – – Not Used 15 Amp Blue – Powertrain Control Mod (PCM) * / Surge Solenoid Purge Valve * 25 Amp Clear –...
Page 274 SERVICING AND MAINTENANCE Cavity Blade Fuse Cartridge Fuse Description * If Equipped 10 Amp Red – A/C Clutch – – Not Used 5 Amp Tan – Radiator Fan (PWM) Enable 50 Amp Red – Voltage Stability Module (VSM) #2 20 Amp Yellow –...
Page 275 SERVICING AND MAINTENANCE Cavity Blade Fuse Cartridge Fuse Description * If Equipped – 60 Amp Yellow Glow Plug * – 40 Amp Green HVAC Blower Motor – 20 Amp Blue Trailer Tow Park Light * – 50 Amp Red Voltage Stability Module (VSM) #1 –...
Page 276 SERVICING AND MAINTENANCE Cavity Blade Fuse Cartridge Fuse Description * If Equipped Ignition Node Module (IGNM) / KIN / RF Hub / Electric Steering Column 15 Amp Blue – Lock (ESCL) / USB Port 20 Amp Yellow – Trailer Tow Left Stop/Turn Lights * 10 Amp Red –...
Page 277 SERVICING AND MAINTENANCE Cavity Blade Fuse Cartridge Fuse Description * If Equipped – 30 Amp Pink Rear Defroster (EBL) 20 Amp Yellow – Cigar Lighter * 20 Amp Yellow – Rear Differential Module (RDM) * 10 Amp Red – Hands Free Release */ Brake Pedal Switch * 10 Amp Red –...
Page 278 SERVICING AND MAINTENANCE Cavity Blade Fuse Cartridge Fuse Description * If Equipped 20 Amp Yellow – Power Outlet (Rear Seats Customer Selectable) * – – Not Used – 40 Amp Green Brake System Module (BSM) – Pump Motor – 30 Amp Pink Electric Park Brake (EPB) –...
Page 279 SERVICING AND MAINTENANCE Interior Fuses The interior fuse panel is located on the Body Control Module (BCM) in the passenger compartment on the left side dash panel under the instrument panel. Cavity Blade Fuse Description * If Equipped 10 Amp Red Interior Lightin 10 Amp Red Intrusion Module/Siren *...
Page 280: Bulb Replacement
SERVICING AND MAINTENANCE EPLACEMENT Replacement Bulbs, Names, And Part Numbers In the instance a bulb needs to be replaced, this section includes bulb description and replacement part numbers. NOTE: See an Authorized Dealer for LED bulb replacement. Interior Bulbs Bulb Name Bulb Number Cargo Lamp TL212–2...
Page 281: Tires
SERVICING AND MAINTENANCE Replacing Exterior Bulbs Tire Markings NOTE: P (Passenger) — Metric tire sizing is based on US  BACK-UP LAMP design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size See below steps to replace: designation.
Page 282 SERVICING AND MAINTENANCE TIRE SIZING CHART EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on US design standards, or "..blank.." = Passenger car tire based on European design standards, or LT = Light truck tire based on US design standards, or T or S = Temporary spare tire or 31 = Overall diameter in inches (in)
Page 283 SERVICING AND MAINTENANCE EXAMPLE: Load Identification: Absence of the following load identification symbols on the sidewall of the tire indicates a Standard Load (SL) tire: XL = Extra load (or reinforced) tire, or  LL = Light load tire or ...
Page 284 SERVICING AND MAINTENANCE EXAMPLE: 01 = Number representing the year in which the tire was manufactured (two digits) 01 means the year 2001  Prior to July 2000, tire manufacturers were only required to have one number to represent the year in which the tire was manufactured. Example: 031 could ...
Page 285 SERVICING AND MAINTENANCE Tire Loading And Tire Pressure This placard tells you important information about the: NOTE: 1. Number of people that can be carried in the The proper cold tire inflation pressure is listed on vehicle. the driver’s side B-pillar or the rear edge of the driver's side door.
Page 286 SERVICING AND MAINTENANCE (4) The resulting figure equals the To determine the maximum loading conditions of Metric Example For Load Limit your vehicle, locate the statement “The combined available amount of cargo and luggage For example, if “XXX” amount equals 635 kg and weight of occupants and cargo should never load capacity.
Page 287 SERVICING AND MAINTENANCE WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them.
Page 288: Tires - General Information
SERVICING AND MAINTENANCE — G Ride Comfort And Vehicle Stability IRES ENERAL NFORMATION WARNING! Proper tire inflation contributes to a comfortable Tire Pressure Unequal tire pressures can cause steering  ride. Overinflation produces a jarring and Proper tire inflation pressure is essential to the problems.
Page 289 SERVICING AND MAINTENANCE after sitting for a minimum of three hours. The cold required for high-speed vehicle operation. Refer to Tire Repair tire inflation pressure must not exceed the an authorized tire dealer or original equipment If your tire becomes damaged, it may be repaired if maximum inflation pressure molded into the tire vehicle dealer for recommended safe operating it meets the following criteria:...
Page 290 SERVICING AND MAINTENANCE Tread Wear Indicators Life Of Tire tire is changed after driving with underinflated tire condition, please replace the TPMS sensor as it is Tread wear indicators are in the original equipment The service life of a tire is dependent upon varying not designed to be reused when driven under a tires to help you in determining when your tires factors including, but not limited to:...
Page 291: Tire Types
SERVICING AND MAINTENANCE Keep dismounted tires in a cool, dry place with as capability. Failure to use equivalent replacement CAUTION! tires may adversely affect the safety, handling, and little exposure to light as possible. Protect tires from contact with oil, grease, and gasoline. ride of your vehicle.
Page 292: Spare Tires - If Equipped
SERVICING AND MAINTENANCE Spare Tire Matching Original Equipped Tire Summer tires do not contain the all season authorized tire dealer for recommended safe designation or mountain/snowflake symbol on the operating speeds, loading and cold tire inflation And Wheel — If Equipped tire sidewall.
Page 293: Wheel And Wheel Trim Care
SERVICING AND MAINTENANCE compact spare tire. Do not install more than one Limited Use Spare — If Equipped HEEL HEEL compact spare tire and wheel on the vehicle at any The limited use spare tire is for temporary All wheels and wheel trim, especially aluminum given time.
Page 294: Snow Traction Devices
SERVICING AND MAINTENANCE NOTE: When cleaning extremely dirty wheels including RACTION EVICES excessive brake dust, care must be taken in the If you intend parking or storing your vehicle for an Use of traction devices require sufficient selection of tire and wheel cleaning chemicals and extended period after cleaning the wheels with tire-to-body clearance.
Page 295 SERVICING AND MAINTENANCE Snow Traction Device (maximum 4X4 - Jeep® Active Drive I Axle Tire/Wheel Size projection beyond tire profile or Trim Level equivalent) Sport Latitude Latitude Plus 215/60R17 Front 9mm Cable Chain Trailhawk 17 x7.0 x 41mm Limited Overland Snow Traction Device (maximum 4X4 - Jeep®...
Page 296: Tire Rotation Recommendations
SERVICING AND MAINTENANCE WARNING! CAUTION! CAUTION! Using tires of different size and type (M+S, To avoid damage to your vehicle or tires, observe Observe the traction device manufacturer’s  Snow) between front and rear axles can cause the following precautions: instructions on the method of installation, unpredictable handling.
Page 297: Department Of Transportation
SERVICING AND MAINTENANCE DEPARTMENT OF TRANSPORTATION variations in driving habits, service The suggested rotation method is the “forward cross” shown in the following diagram. This practices, and differences in road UNIFORM TIRE QUALITY GRADES rotation pattern does not apply to some directional characteristics and climate.
Page 298: Storing The Vehicle
SERVICING AND MAINTENANCE Sustained high temperature can cause What Causes Corrosion? Disconnect the negative cable from battery.  the material of the tire to degenerate Any time you store your vehicle or keep it out of Corrosion is the result of deterioration or removal ...
Page 299: Preserving The Bodywork
SERVICING AND MAINTENANCE INTERIORS Special Care RESERVING ODYWORK If you drive on salted or dusty roads or if you  Washing EATS ABRIC ARTS drive near the ocean, hose off the undercarriage Wash your vehicle regularly. Always wash your  at least once a month.
Page 300: Plastic And Coated Parts
SERVICING AND MAINTENANCE Cleaning Plastic Instrument Cluster designed for easy cleaning, and the manufacturer WARNING! recommends Mopar® Total Clean leather cleaner Lenses applied on a cloth to clean the leather seats as A frayed or torn seat belt could rip apart in a The lenses in front of the instruments in this needed.
Page 301: Technical Specifications
TECHNICAL SPECIFICATIONS VEHICLE IDENTIFICATION NUMBER (VIN) increased pedal travel during application, greater Inspect the wheel mounting surface prior to pedal force required to slow or stop, and potential mounting the tire and remove any corrosion or The VIN is found on the left front corner of the activation of the Brake Warning Light.
Page 302: Fuel Requirements
TECHNICAL SPECIFICATIONS cause engine failure and may void or not be covered EFORMULATED ASOLINE by the New Vehicle Limited Warranty. Many areas of the country require the use of Poor quality gasoline can cause problems such as cleaner-burning gasoline referred to as hard starting, stalling, and hesitations.
Page 303: Do Not Use E-85 In Non-Flex Fuel
TECHNICAL SPECIFICATIONS CNG A LP F Problems that result from using gasoline YSTEM ATERIALS DDED containing more than 15% ethanol (E-15) or ODIFICATIONS Besides using unleaded gasoline with the proper gasoline containing methanol are not the octane rating, gasolines that contain detergents, responsibility of the manufacturer and may void Modifications that allow the engine to run on corrosion and stability additives are...
Page 304: Fuel System Cautions
TECHNICAL SPECIFICATIONS YSTEM AUTIONS CAUTION! Follow these guidelines to maintain your vehicle’s performance: The use of leaded gasoline is prohibited by Federal law. Using leaded gasoline can impair engine performance and damage the emissions control system.  An out-of-tune engine or certain fuel or ignition malfunctions can cause the catalytic converter to overheat. If you notice a pungent burning odor or some ...
Page 305: Engine Fluids And Lubricants
TECHNICAL SPECIFICATIONS Metric 2.4L Engine 7.2 Quarts 6.8 Liters 3.2L Engine 10 Quarts 9.5 Liters * Includes heater and coolant recovery bottle filled to MAX level. ENGINE FLUIDS AND LUBRICANTS Component Fluid, Lubricant, or Genuine Part We recommend using Mopar® Antifreeze/Coolant 10 Year/150,000 Mile Engine Coolant (240,000 km) Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of the manufacturer Standard MS.90032.
Page 306: Chassis Fluids And Lubricants
TECHNICAL SPECIFICATIONS Component Fluid, Lubricant, or Genuine Part We recommend using a Mopar® Engine Oil Filter. If a Mopar® Engine Oil Filter Engine Oil Filter is unavailable only use filters that meet or exceed SAE/USCAR-36 Filter Performance Requirements. Fuel Selection – 2.0L, 2.4L and 3.2L Engine 87 Octane (R+M)/2 Method, 0-15% Ethanol.
Page 307: Customer Assistance
CUSTOMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE IF YOU NEED ASSISTANCE Authorized dealer name  Vehicle Identification Number (VIN)  FOR YOUR VEHICLE FCA US LLC and its authorized dealers are vitally Vehicle delivery date and mileage  interested in your satisfaction. We want you to be REPARE PPOINTMENT happy with our products and services.
Page 308 CUSTOMER ASSISTANCE US V UERTO IRGIN SLANDS ERVICE ONTRACT WARNING! FCA Caribbean LLC You may have purchased a service contract for a Engine exhaust (internal combustion engines vehicle to help protect you from the high cost of P.O. Box 191857 only), some of its constituents, and certain unexpected repairs after FCA US LLC's New Vehicle vehicle components contain, or emit, chemicals...
Page 309 CUSTOMER ASSISTANCE MOPAR® PARTS PUBLICATION ORDER FORMS To contact NHTSA, you may call the Vehicle Safety Hotline toll free at Mopar® original equipment parts & accessories To order the following manuals, you may use either 1-888-327-4236 (TTY: and factory filled fluids are available from an the website or the phone numbers listed below.
Page 310 CUSTOMER ASSISTANCE La operación de este equipo está sujeta a las Owner's Manuals 1. This device may not cause harmful interference, and siguientes dos condiciones: These Owner's Manuals have been prepared with the assistance of service and engineering 2. This device must accept any interference 1.
Page 311 INDEX ......57 ........96 Air Conditioning Filter Automatic Transmission .........299 .......57 ..........268 About Your Brakes Air Conditioning, Operating Tips Adding Fluid ............256 ......268 Adaptive Cruise Control (ACC) (Cruise Air Filter Fluid And Filter Change ..........107 ..........268 Control) Air Pressure Fluid Change...
Page 312 ..........267 ....221 ..........266 Fluid Check Checking Your Vehicle For Safety Radiator Cap .........267 ..........221 ..265 Master Cylinder Checks, Safety Selection Of Coolant (Antifreeze) ............92 ..........209 ........296 Parking Child Restraint Corrosion Protection ..........80 .....
Page 313 Jump Starting ........... 237 Fluid Leaks ............ 223 Easy Entry Seats ..........34 ............ 255 Fluid Level Checks Electric Brake Control System .......170 Oil Filler Cap ......251 Brake ............267 Anti-Lock Brake System ......169 Oil Filter ............ 256 Engine Oil ..........
Page 314 ....137 ............66 ..........237 Gross Combination Weight Rating Hood Prop Jump Starting ........136 ..........66 Gross Trailer Weight Hood Release ......136 Gross Vehicle Weight Rating ............135 GVWR Key Fob .............17 ...........22 Ignition Arm The System ............17 ........22 Switch Disarm The System ......224 ........96 Hazard Warning Flashers...
Page 315 Automatic Headlights ........45 Load Shed Battery Saver On ......79 Rearview ..........38 Automatic High Beam ........45 Load Shed Electrical Load Reduction ....79 Vanity ............38 Brake Assist Warning ........173 Load Shed Intelligent Battery Sensor ....79 Modifications/Alterations Brake Warning ..........80 Loading Vehicle ..........
Page 316 ............256 ............62 ..144 Filter Inverter Shifting Into Transfer Case Neutral (N) ...........256 ............39 Filter Disposal Mirrors Shifting Out Of Power Transfer Unit ........255 ....60 ..........145 Identification Logo Outlet (Auxiliary Electrical Outlet) Neutral (N) ........256 ............62 Materials Added To Windows Shifting Out Of Transfer Case .......
Page 317 Seat Belts Maintenance ....... 297 Shoulder Belts ..........190 Safety Checks Inside Vehicle ......221 Seats ...............30 Side Distance Warning System ..... 123 Safety Checks Outside Vehicle ......222 Adjustment ...........30 Side View Mirror Adjustment ......39 Safety Defects, Reporting ......307 Easy Entry ............34 Signals, Turn ..........
Page 318 ......... 39 ......... 295 ......137 Sun Visor Extension Quality Grading Weight Distributing Hitch ........64 ............287 ............140 Sunshade Operation Radial Wiring ..198 ..........289 ........138 Supplemental Restraint System – Air Bag Replacement Trailer Towing Guide ........178 ............
Page 319 Wheel And Wheel Tire Trim ......291 Vanity Mirrors ..........38 Warning light Wind Buffeting ..........64 Vehicle Identification Number (VIN) ....299 ..............80 Window Fogging ..........57 Vehicle Loading ........135 Yellow ............83 Windows ............62 Vehicle Maintenance ........255 Warning Lights And Messages ......80 Power ............62...
Page 323 It is always the driver’s responsibility to comply with all local laws. This Owner’s Manual has been prepared to help you get acquainted with your new Jeep brand vehicle and to provide a convenient ®...
Page 324 ©2021 FCA US LLC. All Rights Reserved. Tous droits réservés. Jeep is a registered trademark of FCA US LLC. Jeep est une First Edition marque déposée de FCA US LLC. App Store is a registered trademark of Apple Inc. Google Play Store is a registered trademark of Google.

This manual is also suitable for:

Cherokee 2022

Jeep 2022 CHEROKEE Owner's Manual

Quick Links

Related Manuals for Jeep 2022 CHEROKEE

Summary of Contents for Jeep 2022 CHEROKEE