Table of Contents
Advertisement
324
VEHICLE IDENTIFICATION
Vehicle Identification Number
The Vehicle Identification Number (VIN) is
stamped on a plate located on the left front
corner of the instrument panel cover, which is
visible from outside the car through the
windshield.
Vehicle Identification Number (VIN)
NOTE:
It is illegal to remove or alter the VIN.
TECHNICAL SPECIFICATIONS
BRAKE SYSTEM
Your vehicle is equipped with dual hydraulic
brake systems. If either of the two hydraulic
systems loses normal capability, the remaining
system will still function. However, there will be
some loss of overall braking effectiveness. You
may notice increased pedal travel during
application, greater pedal force required to slow
or stop, and potential activation of the Brake
Warning Light.
In the event power assist is lost for any reason
(i.e., repeated brake applications with the
engine OFF) the brakes will still function.
However, the effort required to brake the
vehicle will be much greater than that required
with the power system operating.
WHEEL AND TIRE TORQUE SPECIFICATIONS
Proper lug nut/bolt torque is very important to
ensure that the wheel is properly mounted to
the vehicle. Any time a wheel has been removed
and reinstalled on the vehicle, the lug nuts/
bolts should be torqued using a properly
calibrated torque wrench using a high quality six
sided (hex) deep wall socket.
Torque Specifications
Wheel Bolt
**Wheel Bolt
Torque
Size
89 Ft-Lbs
M12 x 1.25
(120 N·m)
**Use only authorized dealer recommended lug nuts/
bolts and clean or remove any dirt or oil before tightening.
Wheel Bolt
Socket Size
17 mm
Advertisement
Table of Contents
