Jeep 2020 RENEGADE Owner's Manual page 338

336 MULTIMEDIA
Safety/Assistance
After pressing the Safety/Assistance button on the touchscreen, the following settings will be available:
Setting Name
ParkView Backup Camera Delay
NOTE:
The "ParkView Backup Camera Delay" setting determines whether or not the screen will display the rear view image with dynamic grid lines for up to
10 seconds after the vehicle is shifted out of REVERSE. This delay will be canceled if the vehicle's speed exceeds 8 mph (13 km/h), the transmission
is shifted into PARK, or the ignition is switched to the OFF position.
ParkView Backup Camera Active
Guidelines
NOTE:
The "ParkView Backup Camera Active Guidelines" setting overlays the Backup Camera image with active, or dynamic, grid lines to help illustrate the
width of the vehicle and its projected backup path, based on the steering wheel position when the option is checked. A dashed center line overlay
indicates the center of the vehicle to assist with parking or aligning to a hitch/receiver.
Forward Collision Warning Plus (FCW+)
Sensitivity — If Equipped
NOTE:
The "Forward Collision Warning Plus (FCW+) Sensitivity" setting determines at what relative distance the vehicle directly in front of you needs to be
at before the system will warn you of a possible collision based on the option selected. "Far" will give you the most amount of reaction time, whereas
"Near" will give you the least amount of reaction time, based on the distance between the two vehicles.
Forward Collision Warning Plus (FCW+)
— If Equipped
Selectable Options
On
On
Far
Off
Off
Off
Med
Sound Only Sound and Brake
Near