Table of Contents
Advertisement
246
IN CASE OF EMERGENCY
4. Releasing the two tabs, and remove the
bulb and bulb socket from the housing.
Position Light/Daytime Running Light Assembly
1 — Bulb Socket
5. Install the new bulb and socket into the
housing, and engage the two tabs, making
sure that it is properly locked.
6. Reconnect the electrical connector.
7. Reinstall the access door.
Front Fog Lights
To replace the bulbs proceed as follows:
1. Turn the front wheels completely.
2. Use a suitable tool to remove the access
door.
Position Light/Daytime Running Light/
Fog Light Access
1 — Screws
2 — Access Door
3. By pushing the electrical connector tab
remove the electrical connector.
Fog Light Assembly
1 — Bulb Socket
2 — Electrical Connector
3 — Bulb
4. Rotate the bulb counterclockwise, and then
replace the bulb.
5. Insert the new bulb in the socket, making
sure the bulb is locked into place.
6. Reconnect the electrical connector.
7. Reinstall the access door.
Advertisement
Table of Contents
