Safety; General Safety Information; Safety Terms Used In This Manual; Warning And Caution Statements - FLIR CM94 User Manual

3

Safety

3.1 General Safety Information

This user manual contains information and warnings that must be followed for
operating the instrument safely and maintaining the instrument in a safe oper-
ating condition. If the instrument is used in a manner not specified by the man-
ufacturer, the protection provided by the instrument may be impaired.
The meter protection rating, against the users, is double insulation per UL/
IEC/EN61010-1 Ed. 3.0, IEC/EN61010-2-033 Ed. 1.0, CAN/CSA C22.2 No.
61010-1 Ed. 3.0, IEC/EN61010-2-032 Ed. 3.0 & IEC/EN61010-031 Ed. 1.1:
Measurement Category IV 1000V AC & DC.
Per IEC61010–1 OVERVOLTAGE CATEGORY
OVERVOLTAGE CATEGORY II (CAT II) is for equipment intended to be sup-
plied from the building wiring. It applies both to plug-connected equipment
and to PERMANENTLY CONNECTED EQUIPMENT.
OVERVOLTAGE CATEGORY III (CAT III) is for equipment intended to form
part of a building wiring installation. Such equipment includes socket outlets,
fuse panels, and some MAINS installation control equipment.
OVERVOLTAGE CATEGORY IV (CAT IV) is for equipment installed at or near
the origin of the electrical supply to a building, between the building entrance
and the main distribution board. Such equipment may include electricity tariff
meters and primary over-current protection devices.

3.2 Safety Terms Used In This Manual

WARNING: Identifies conditions and actions that could result in serious injury
or even death to the user.
CAUTION: Identifies conditions and actions that could cause damage or mal-
function in the instrument.

3.3 Warning and Caution Statements

To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
The meter is intended only for indoor use.
#NAS100019; r. AC/59959/59961; en-US
WARNING
3