Safety; Fcc Compliance - FLIR ME13552 User Manual

8. Safety

 The electrode pins are sharp; please use caution when handling the meter. Keep
the protective cover in place when not in use.
 Keep the instrument dry.
 Do not strike the meter in an effort to push the pins further into the material
under test. Always hold the meter by its side grips when firmly pressing the pins
into the tested material.
 Store the batteries separately when the meter is to be stored for periods longer
than 60 days.

8.1 FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio/TV technician for help.
WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
FLIR MR55 USER MANUAL Document Identifier: MR55-en-US_AB
13