5
Meter Operation
2. Insert the banana plug Type-K temperature probe into the meter's input
terminals observing correct polarity. A plug adapter with banana plug to
Type-K socket (to adapt to other Type-K standard mini plug temperature
probes) can be obtained optionally.
3. Touch the thermocouple probe tip to the surface of an object under test or
hold the probe in air.
4. Read the temperature measurement on the display.
5. Use the MODE button to toggle ℃ and ℉ units of measure.
5.16 Non-Contact AC Voltage Detector
Use caution when the measured voltage is greater than 30V DC or AC rms.
Figure 5.9 Non-Contact AC Voltage Detection (NCV).
1. Set the function switch to the AC Voltage position and remove the test
leads from the CM94.
2. Short press the NCV button. The display will show the EF symbol (electro-
motive force).
#NAS100019; r. AC/59959/59961; en-US
CAUTION
20