Control Button Descriptions; Rotary Switch Positions - FLIR CM94 User Manual

4
Descriptions

4.2 Control Button Descriptions

4.3 Rotary Switch Positions

#NAS100019; r. AC/59959/59961; en-US
Short press to toggle AC/DC where necessary, to select an option at a mul-
ti-option rotary switch position, and to toggle ℃ and ℉ units in temperature
measurement mode.
Long press to toggle the display backlight ON/OFF.
Short press to change to Manual range mode, subsequent presses will step
through available ranges. Long press to return to the Auto range mode.
Short press to engage the Relative mode where subsequent measure-
ments are displayed relative to the measurement on the display at the time
of the button press (the delta relative icon appears when the Relative mode
is engaged). Long press to zero the display before taking a DC
measurement.
Short press to engage/disengage the Non-Contact Voltage Detection mode.
Short press to freeze/unfreeze displayed readings.
Long press to engage the PEAK mode. Short press to toggle between MAX
(up arrow icon appears) and MIN (down arrow icon appears). Long press to
exit the PEAK mode.
Meter power is switched OFF.
Low Impedance mode.
AC Voltage mode with VFD (low pass filter).
AC Voltage mode.
DC Voltage mode.
Current mode (AC/DC).
Continuity mode.
Resistance mode.
Diode mode.
Capacitance mode.
Thermocouple temperature measurement mode.
7