11Changing The Font Colour; 12Setting The Gear Shift; 13Rear Derailleur Reset - Kettler Scarpia FS 1.0 LTD Gold Translation Of The Original Operating Instructions

6.13.6.11 Changing the font colour

The settings menu is open.
 Press the button (display) briefly repeatedly
until FONT COLOR is displayed.
 Press the button (display).
 You will see two selection options:
Screen display Function
W HI T E Black letters on a white background
BLA CK White letters on a black background
Table 42: Font colour change options
 Push the long assistance lever or the short
assistance lever briefly until the required
function is highlighted.
 Press the button (display).
 The font colour has been changed.
 The display screen switches back to the start
screen.
6.13.6.12 Setting the gear shift
You can only configure the gear shift if you are
using an electronic gear shift.
The gear shift is adjusted in the settings menu with
the menu item A D J U S T. Special knowledge and
tools are required for setting the gear shift. These
settings must only be made by a specialist dealer.
MY20K03-2_1.0_18.07.2019
6.13.6.13 Rear derailleur reset
The rear derailleur protection function will trigger
to protect the system if the pedelec is exposed to
a severe impact – due to a fall, for example. The
connection between the motor and the link is
interrupted instantly, rendering the rear derailleur
inoperable.
If you open RD PROTECTION RESET, the
connection between the motor and link is re-
established and the rear derailleur function reset.

The settings menu is open.
 Press the button (display) repeatedly until
RD PROTECTION RESET is displayed.
 Press the button (display).
 You will see two selection options:
Screen display Function
O K Rear derailleur reset is
in progress
CANCEL Returns to the menu list display screen
Table 43: Rear derailleur reset change options
 Push the long assistance lever or the short
assistance lever briefly until the required
function is highlighted.
 Press the button (display).
 The display screen switches back to the start
screen.
 Turn the crank.
 The connection between the motor and the link
is restored.
Operation
69