Side Down Tube Battery; Inserting The Battery; Removing The Battery - Kettler Scarpia FS 1.0 LTD Gold Translation Of The Original Operating Instructions

Notice
If you leave a key inserted when riding or
transporting the pedelec, it may break off or the
locking system may open accidentally.
 Remove the key from the battery lock
immediately after use.
 We recommend that you attach the key to a
key ring.

Switch off the battery and the drive system
before removing or inserting the battery.

6.12.1 Side down tube battery


Switch off the battery and the drive system
before removing or inserting the battery.

6.12.1.1 Inserting the battery

1
2
Figure 64: Positioning battery (1) on mount (2)
 Place the battery on the contacts in its lower
mount. Push the battery inwards.
 There is an audible clicking noise.
 Secure the battery by closing. Remove key.
 Check the inserted battery to make sure it is
fastened and firmly in place.
MY20K03-2_1.0_18.07.2019
1
2
Figure 65: Closed key cover (1) and charge cap (2)
 Before setting off, ensure that the key cover
and charge cap are closed.

6.12.1.2 Removing the battery

 Remove key cover.
 Insert key into the key cylinder in the battery
mount. The position of the key has no effect on
the battery mount. You can insert the key in
any position. You cannot remove the key if it is
not in the insert position.
Figure 66: Removing and inserting the down tube battery
 Turn the key in a clockwise direction to unlock
the battery (1) and press the key into place (2).
 The battery is unlocked.
 Support the battery in your hand to ensure that
it won't fall out. Remove the key and re-insert
the battery lock cover.
Remove the battery using removal handle.
Operation
61