Error Messages; Battery Error Message - Kettler Scarpia FS 1.0 LTD Gold Translation Of The Original Operating Instructions

6.2

Error messages

6.3

Battery error message

The battery indicates errors with different LED
statuses. The LED statuses are lit (
( ) and flashing ( ).
Type Status
System error Communication error with
the bicycle system.
Temperature protection If the temperature exceeds
the guaranteed operating
range, the battery will switch
off.
Error during security This is displayed if no
authentication original drive unit is
connected. This is
displayed if one of the
cables is not connected.
Charge error This is displayed if an error
occurs during the charging
process.
Battery malfunction Electrical fault in the battery.
Table 25: Battery error messages
MY20K03-2_1.0_18.07.2019
), non-lit
Lighting pat-
Remedy
tern

Check that the charging cable is firmly and properly connected.

Contact your specialist dealer if the problem persists.

Store battery in a cool place where there is no direct sunlight until
the battery interior temperature has fallen sufficiently.

Contact your specialist dealer if the problem persists.

Connect an original battery and an original drive unit.

Check the status of the cables.

Contact your specialist dealer if the problem persists.

Remove the plug connector between the battery and charger.

Press the On-Off button when only the battery is connected.

Contact your specialist dealer if the problem persists.

Plug the charger into the battery.

Remove the charger.

Press the On-Off switch when the battery is connected.

Contact your specialist dealer if the problem persists.
Operation
41