Error Message Screen - Kettler Scarpia FS 1.0 LTD Gold Translation Of The Original Operating Instructions

6.5

Error message screen

If an error message is shown over the entire
display, follow the procedure indicated below to
reset the screen.
 Press the On-Off button (battery).
 Take the battery from the mount.
Contact your specialist dealer if the problem
persists.
Code Cause
E010 A system error has been detected. No pedal assistance is
E011 An error has occurred during
system operation.
E013 An anomaly has been detected in
the drive unit firmware.
E014 The speed sensor may have been
installed incorrectly.
E020 A communication error has been
detected between the battery and
the drive unit.
E021 The battery connected to the drive
unit meets the system standard but
is not supported.
E022 The battery connected to the drive
unit does not meet the system
standard.
E030 The fitted front derailleur is different
to the one configured in the system.
E033 The current firmware does not
support system operation.
E043 The display firmware may have
been corrupted.
Table 27: List of warnings
MY20K03-2_1.0_18.07.2019
Limitation
provided during the ride.
No pedal assistance is
provided during the ride.
No pedal assistance is
provided during the ride.
No pedal assistance is
provided during the ride.
No pedal assistance is
provided during the ride.
No pedal assistance is
provided during the ride.
Switch-off of all system
functions.
No assistance will be provided
during the ride.
No pedal assistance is
provided during the ride.
No pedal assistance is
provided during the ride.
Remedy

Press the On-Off button (battery).

Contact your specialist dealer if the problem persists.

Switch the system on again.

Contact your specialist dealer.

Contact your specialist dealer.

Check that the cable between the drive unit and the battery is
connected properly.

Contact your specialist dealer if the problem persists.

Press the On-Off button (battery).

Contact your specialist dealer if the problem persists.

Press the On-Off button (battery).

Contact your specialist dealer if the problem persists.

Contact your specialist dealer.

Contact your specialist dealer.

Contact your specialist dealer.
Operation
43