Installing The Wheel With Screw-On Axle (20 Mm) - Kettler Scarpia FS 1.0 LTD Gold Translation Of The Original Operating Instructions

 Tighten the axle with a 5 mm hexagon socket
spanner to 8–10 Nm.
Figure 24: Tightening the axle
 Insert the securing screw on the non-drive
side.
Figure 25: Pushing the quick release lever into the axle
 Tighten the securing screw with a 5 mm
hexagon socket spanner to 5–6 Nm.
 The lever is mounted.
Figure 26: Tightening the securing screw
MY20K03-2_1.0_18.07.2019
5.3.2.2 Installing the wheel with screw-on axle
(20 mm)
 Insert the axle completely on the drive side.
Figure 27: Tightening the inserted axle
 Tighten the securing clip with a 4 mm hexagon
socket spanner to 7 Nm.
Figure 28: Tightening the axle
Assembly
33