6.13.6.3
Closing the settings menu
Push the long assistance lever or short
assistance lever briefly repeatedly until E X I T
is highlighted.
Press the button (display).
The settings menu is closed.
6.13.6.4
Deleting the journey information
The TRIP distance completed can be deleted.
TIME, AVG and MAX are also deleted if the
distance is deleted.
The settings menu is open.
Press the button (display) briefly repeatedly
until CLEAR is displayed.
Press the button (display).
You will see two selection options:
Screen display
Function
EXI T
Returns to the menu list display screen
DST
Deletes the journey information
Table 37: Journey information change options
The DST indicator flashes.
Push the long assistance lever or the short
assistance lever briefly until T R I P is
highlighted.
Press the button (display).
The data have been cleared.
The [DST] indicator light stops flashing.
The display screen switches back to the start
screen.
MY20K03-2_1.0_18.07.2019
6.13.6.5
Setting the clock
Configure the clock settings. First set the hours
and then the minutes. You can change the values
quickly by keeping the long assistance lever or
the short assistance lever pressed down.
The settings menu is open.
Press the button (display) briefly repeatedly
until CLOCK is displayed.
Press the button (display).
The set time is displayed. The hour indicator is
highlighted.
Push the long assistance lever or the short
assistance lever repeatedly until the required
hour is displayed.
Press the button (display).
The minute indicator is highlighted.
Push the long assistance lever or short
assistance lever repeatedly briefly until the
required minute is displayed.
Press the button (display).
The display screen switches back to the start
screen.
6.13.6.6
Changing the backlight
The settings menu is open.
Press the button (display) briefly repeatedly
until BACKLIGHT is displayed.
Press the button (display).
You will see two selection options:
Screen display
Function
O N
Light always on.
OFF
Light always off.
MANUAL
Is switched on and off with the battery-
powered light
Table 38: Light change options
Push the long assistance lever or the short
assistance lever briefly until the required
function is highlighted.
Press the button (display).
The light settings have been changed.
The display screen switches back to the start
screen.
Operation
67