Warning Message - Kettler Scarpia FS 1.0 LTD Gold Translation Of The Original Operating Instructions

6.4

Warning message

Code Cause
W010 The drive unit temperature is
higher than during normal
operation.
W011 The bike's speed cannot be
detected.
W013 The torque sensor may not
have initialized completely
successfully.
W032 A mechanical rear derailleur
may have been fitted instead
of an electronic one.
Table 26: List of warnings
MY20K03-2_1.0_18.07.2019
Limitation
Pedal assistance is possibly less
than normal.
The maximum speed before
pedal assistance is provided
may be lower than normal.
Pedal assistance is possibly less
than normal.
The pedal assistance provided in
the WALK level of assistance is
possibly less than normal.
Remedy

Do not use the assistance function any more until the drive unit
temperature decreases.

Contact your specialist dealer if the problem persists.

Check that the speed sensor is fitted correctly.

Contact your specialist dealer if the problem persists.

Take your foot off the pedal.

Press the battery On-Off button and switch the system on again.

Contact your specialist dealer if the problem persists.

Re-fit the front derailleur for which the system is designed.

Contact your specialist dealer if the problem persists.
Operation
42