Exit Walk Level Of Assistance; Selecting The Level Of Assistance; Switching The Journey Information; Clearing The Displayed Distance Travelled - Kettler Scarpia FS 1.0 LTD Gold Translation Of The Original Operating Instructions

6.13.5.3

Exit WALK level of assistance

 Push the short assistance lever to change
from the WALK level of assistance to the level
of assistance last used.
 If the long assistance lever is not pushed for
longer than one minute, the level of assistance is
reset to the level of assistance used previously.
6.13.5.4

Selecting the level of assistance

The following levels of assistance are available:
Screen display Details
B O O ST High level of assistance.
T R AIL Normal assistance
E CO Low level of assistance
O F F Assistance off
W ALK Activated push assist
Table 33: Overview of levels of assistance
 Push the long assistance lever briefly to
increase the level of assistance.
 Push the short assistance lever to reduce the
level of assistance.

6.13.6 Switching the journey information

The displayed journey information can be switched.
 Press the button (display) repeatedly until the
desired item of journey information is displayed.
Screen display Function
DS T Distance travelled since the last reset
Display of the total distance travelled
ODO
(cannot be changed)
Estimated range of the available battery
RA NGE*
charge
T IME Trip time
AVG Average speed
MAX Maximum achieved speed
CA DEN C E Number of crank revolutions per minute
CL OCK Clock
Table 34: Journey information
*1 The battery charge status is not displayed if
RANGE is displayed. The range should be used
for guidance purposes only.
*2 If the push assistance function is activated, the
on-screen indicator switches from [RANGE] to
[RANGE ---].
 When journey information is shown, the display
returns to the speed screen after 60 seconds.
MY20K03-2_1.0_18.07.2019
6.13.6.1 Clearing the displayed distance
travelled

The settings menu is open.
 Push the long assistance lever or short
assistance lever repeatedly until C L EA R is
highlighted.
 Press the button (display).
 There are two selection options:
Screen display Function
EXI T Return to the settings menu
DS T Delete the displayed distance travelled
Table 35: Journey information setting options
 Push the long assistance lever or short
assistance lever until the required function is
highlighted.
 Press the button (display).
 The highlighted function is carried out. The
settings menu is displayed.
6.13.6.2

Opening the settings menu


You can only change the settings when you stop.
 Press the button (display).
 Push the long assistance lever or short
assistance lever briefly to move the cursor on
the menu.
 Push the short assistance lever until the
required journey information is shown.
Screen display
C LEAR
CLOCK
BACKLIGHT
BRIGHTNESS
BEEP
UNIT
LA NG U AG E
FONT COLOR
ADJUST
RD PROTECTION RESET
EXIT
Table 36: Journey information
Operation
Function
Clears the settings
Setting the clock
Adjusts the backlight
Adjusts display screen
brightness
Switches the beep on and off
Adjusts journey distance unit:
km/h or m.p.h.
Adjusts language
Makes colour setting
Adjusts the electronic gear shift
Activates the rear derailleur
reset
Returns to the main screen
66