Disposal Of Linak Products - Linak DESKLINE DL8 IC User Manual

Disposal of LINAK products

As LINAK customers often ask us how our products can be disposed of or scrapped we have prepared this guidance that
enables a classifi cation to different waste fractions for recycling or combustion.
Guidance
We recommend that our products be disassembled as much as possible and divided into different waste groups for recycling or
combustion.
For example, waste can be sorted into metals, plastics, cable scrap, combustible material, and recoverable resources.
Some of these main groups can be further divided into subgroups; e.g. metal can be divided into steel/aluminium/copper and
plastic can be divided into ABS/PA/PE/PP.
As an example, the table below breaks down the different components in LINAK products to various recycling groups:
Product
Columns/ Actuator :
Control Box :
Handset/Control :
By now almost all our casted plastic parts are supplied with an interior code for plastic type and fibre contents, if any.
Main groups of disposal
Product main groups
DLXX IC
DPXX
SMPS
Disposal of batteries
Details regarding safe disposal of used and leaking batteries:
Batteries should be disposed in accordance with appropriate federal, state and local regulations. LINAK recommends that
used or leaking batteries are disposed through local recycling system. Please do not throw used or leaking batteries in normal
household waste or in nature. This will cause damage to the enviroment.
How to deal with leaking batteries.
Leaking batteries should be disposed as described above.
If leaking batteries are discovered in the product the batteries must be removed at once to minimise damage to the product. If
leaking batteries are left in the product it might become defect.
It is recommended to use plastic gloves when handeling leaking batteries. The contents of a leaking batteries can cause
chemical burns and respiratory irritation.
If exposed to the contents of a leaking battery, please wash with soap and water. If irritation persists, please seek medical
attention. In case of eye contact, please flush eyes thoroughly with water for 15 minutes and seek medical attention."
Components
Spindle and motor
Plastic housing
Cable
PCB boards
PCB boards
Plastic housing
Cable
Transformer
Plastic housing
Cable
PCB board
Metal scrap Cable scrap
X X
X
Recycling group
Scrap
Plastic recycling or combustion
Cable scrap or combustion
Electronics scrap
Electronics scrap
Plastic recycling or combustion
Cable scrap or combustion
Metal scrap
Plastic recycling or combustion
Cable scrap or combustion
Electronics scrap
Electronics scrap
X
X
X
Page 21 of 28
Plastic recycling Comments
or combustin
X
X
X