Misc. On The Deskline ® Dl8 Ic / Dl9 Ic / Dl10 Ic / Dl11 Ic System; Warranty; Maintenance - Linak DESKLINE DL8 IC User Manual

Misc. on the DESKLINE DL8 IC / DL9 IC / DL10 IC / DL11 IC system
®
This system is a DESKLINE system developed for desks and for indoor use in offices. Do not use it in industrial kitchens or in
other enviroments that have to be cleaned with aggressive detergents.
Do not bolt the legs to the floor so that free movement is prevented. This could cause serious damage to the legs in fault
situations.
Warranty - 60 months on DESKLINE
®
This will be valid for all DESKLINE products produced after the 1 of May 2015.
® st
Products produced before 1 of May 2015 will still be covered by 36 months.
st
Products used in DESKLINE application: If these products are used in another application, they will be covered by 18 months

warranty.

If there is any doubt that returned products are within the warranty period it is to be treated as if they are covered by the
warranty. We recommend that you use the date of the Control box or actuator as reference if possible. We will have our
purchase no. printed on the label.

Maintenance

Clean dust and dirt on the outside of the system at appropriate intervals and inspect them for damage and breaks.
Inspect the connections, cables, and plugs and check for correct functioning as well as fixing points.
Service of double-insulated products:
Class II
A Class II or double insulated electrical appliance is one which has been designed in such a way that it does not require a
safety connection to electrical earth (US: ground).
The basic requirement is that no single failure can result in dangerous voltage becoming exposed so that it might cause an
electric shock and that this is achieved without relying on an earthed metal casing. This is usually achieved at least in part by
having two layers of insulating material surrounding live parts or by using reinforced insulation.
There is no earthing/grounding means provided on the product, and no earthing/grounding means is to be added to the
product.
In Europe, a double insulated appliance must be labelled "Class II", "double insulated" or bear the double insulation symbol
(a square inside another square).
Servicing a double-insulated product requires extreme care and knowledge of the system, and is to be done only by qualified
service personnel. Replacement parts for a double-insulated product must be identical to the parts they replace.
The cleaners and disinfectants must not be highly alkaline or acidic (pH value 6-8).
Page 11 of 28