Nortel Meridian 1 Mini-Carrier Remote Description, Installation, And Maintenance page 125

Allowing Meridian 1 Mini-Carrier Remote equipment to operate
without proper answer supervision signals is a violation of FCC Rules,
Part 68. Therefore:
• This equipment returns proper answer supervision signals to the Public
Switched Telephone Network (PSTN) when:
— answered by the called station
— answered by the attendant
— routed to a recorded announcement device that can be administered
by the CPE user
— routed to a dial prompt
• This equipment returns answer supervision on all DID calls forwarded
back to the PSTN. Permissible exceptions are:
— a call is unanswered
— a busy tone is received
— a reorder tone is received
This equipment is capable of providing users access to interstate providers of
operator services through the use of equal access codes. Failure to provide
equal access capabilities is a violation of the Telephone Operator Consumer
Services Improvement Act of 1990 and Part 68 of the FCC Rules.
Industry Canada Warnings
The Industry Canada label identifies certified equipment. This certification
means that the equipment meets certain telecommunications network
protective, operational, and safety requirements as prescribed in the
appropriate Terminal Equipment Technical Requirements Document(s). The
Department does not guarantee that the equipment will operate to the user's
satisfaction.
Before installing this equipment, users should ensure that it is permissible to
be connected to the facilities of the local telecommunications company. The
equipment must also be installed using an acceptable method of connection.
The customer should be aware that compliance with the above conditions
may not prevent degradation of service in some situations.
Appendix B: Regulatory approvals
Mini-Carrier Remote Description, Installation, and Maintenance
Page 125 of 150